Jump to content
SAU Community

Recommended Posts

Hi I have recently purchased an R34 25GTT, and was wondering what petrol to use.

I have gathered that 95 Octane is suitable, yet i pumped V-Power from Shell, which was a little bit more expensive. Just wanted to find out what others out there with similar imported cars prefer to use, and if 95 is good enough (i.e. that it wont damage the car like normal unleaded would)

CHeers.

Link to comment
https://www.sau.com.au/forums/topic/176015-r34-petrol-choices/
Share on other sites

32 , 33 or 34 i would highly highly highly recommend premium.

BP ultimate, shell V power, or mobil's premium one (cant think of the name), are the only 3 i consider. i personally wouldnt use 95, i stick with BP which is 98. use it 100% of the time and works for me.

this has been covered a bit before so try a search and im sure you will read more posts about it.

dude, there's no ' R34 petrol choices ' LOL. Basically most of the skylines, silvias, supras are similiar. Just stick to 98 Octane and you'll be fine. Doesn't really matter Shell V-Power, BP Ultimate, Mobil Synergy 8000, Caltex Vortex 98, these 4 are the most popular choices. Different people may argue Shell is better than Caltex blah blah blah, but they are basically the same. :D

Like other people have said, stick with 98 octane (or better). Also you will get best results if you stay with the same brand of fuel too.

I'd stay away from anything less than 98 octane unless you have to use it (ie. in the country). Your fuel economy will likely be better with 98 octane anyway so the overall cost will probably not be that different. Its also better for your engine so it will save you money in the long run :D

Just like everyone said, 98oct would be ideal but if you are a real tightass, 92/95oct would be fine if you dont thrash your car. Thrashing your R34 on 92/95, your motor will ping its head off and eventually couple of cylinders (if you are lucky enough :( ) will come flying out from your block.

I know a few guys that were using 92/95oct in their rexies, skylines and 200s due to the high fuel prices couple of months ago, most of these boys were driving in excess of 100km per day so saving every cent mattered.

Just like everyone said, 98oct would be ideal but if you are a real tightass, 92/95oct would be fine if you dont thrash your car. Thrashing your R34 on 92/95, your motor will ping its head off and eventually couple of cylinders (if you are lucky enough :D ) will come flying out from your block.

I know a few guys that were using 92/95oct in their rexies, skylines and 200s due to the high fuel prices couple of months ago, most of these boys were driving in excess of 100km per day so saving every cent mattered.

I've heard this argument many times, but given that using 91octane fuel (which most regular unleaded is) is risking blowing your engine, ask yourself if it really is cheaper for the sake of $5 a week in savings...

In my opinion spending a little extra on fuel (its not that much really) is very cheap insurance and protection for your engine :(

I've heard this argument many times, but given that using 91octane fuel (which most regular unleaded is) is risking blowing your engine, ask yourself if it really is cheaper for the sake of $5 a week in savings...

In my opinion spending a little extra on fuel (its not that much really) is very cheap insurance and protection for your engine :)

yeh agreed.. when it comes down to it, the savings are quite minimal, and you relly got to look at the longer term.. i mean u could sacrifice a cup of coffee, or pack of smokes rather than risking ur baby :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
    • Hi, i’m converted my r34 4dr auto to manual but need help with gearbox wiring. There are bunch of wires no idea which one for speedo drive, neutral, reverse can anyone help me. IMG_6860.mov
×
×
  • Create New...