Jump to content
SAU Community

Recommended Posts

I ran a 13.4 on a stock 33 with exhaust....thats pretty quick....what has a stock 350 run?

id like to think that over 400 metres the line would catch up....crossing the line at 103mph....

Mate, that is an awesome time for a 33 with nothing but exhaust.

What kind of rubber were you using?

You must have got off the line quicker than Kate Moss when there's a camera in the room :-)

I ran a 13.4 on a stock 33 with exhaust....thats pretty quick....what has a stock 350 run?

A stockish 350Z would struggle to run mid 13's. Maybe on cheater slicks it could run a 14 flat or a high 13. Most of the car mags have an Australian delivered Z33 running 14.3-14.5. The US ones made a bit more power, so they dipped lower into the 14s.

I've G-Tech timed myself (on a private road, of course) at 13.8, but my car's got most of the pipework replaced as well as a few other bits and pieces. I think that, with a better driver and tyres that haven't been ruined by countless skidpan events, it might run a 13.5 but I doubt I personally will be achieving that in the near future.

id like to think that over 400 metres the line would catch up....crossing the line at 103mph....

It should. My trap speed with just a catback and completely f**ked RT215s was 100mph. So against a stocker you should reel a stock Z in.

You cant compare the maunfacture spec tho....i find that they are way off....you never really see them below 14 seconds...

I was surprised with the 300C it ran a 13.5 stock....thought that massive thing would be over 14.....or more surprising a jeep, not sure what it was, but it ran a 13.2, thats crazy speed...

  • 5 years later...

Sorry to necro this post I can't help but reply, I have a stock auto R33 GTST Sedan... Just beat a 350Z... They do have you from 0-100 but after that, wooshhh the R33 is off. This is from a rolling start though, 40km/hr, I hit 180km/hr and was half a car ahead and still gaining.

Tried telling my mate this.

He did not agree.

ive got 3inch straight through, pod , splitfires & installing boost controller and FMIC next friday and turning it up to 10psi.Running ku31's all round with pedders xa coils. So just basic mods... Mate has a stock 350 ready to race.

Guess I'l have to video it and we'll see..

ive got 3inch straight through, pod , splitfires & installing boost controller and FMIC next friday and turning it up to 10psi.Running ku31's all round with pedders xa coils. So just basic mods... Mate has a stock 350 ready to race.

Guess I'l have to video it and we'll see..

You will destroy the 350Z, the last few 350's i raced at WSID were 1/10th slower than me. The only one that beat me was a newer model that out launched me and did a 14.2-14.3 sec pass with identical MPH to me. PS this is in a NON TURBO 300zx.

FYI the fastest "stock" 350z time, Stock as in right down to the tyre, was a 2007 car. Thats a HR motor.

13.150 @ 107.62mph

2.027 60ft.

something to think about...

http://my350z.com/forum/drag/233840-top-25-1-4-mile-times-for-tt-st-supercharger-nitrous-bolt-ons-stock.html

FYI the fastest "stock" 350z time, Stock as in right down to the tyre, was a 2007 car. Thats a HR motor.

13.150 @ 107.62mph

2.027 60ft.

something to think about...

http://my350z.com/fo...-ons-stock.html

There's a 10MPH variance between cars there, never seen a 350Z do anywhere near those times bog stock or trap that sort of mph.

Its all been verified as the site says. There is no argument to be had.

13.65 @103.5

Thats an ADM 2009 model. With a slip.

Not arguing, all i'm saying is i have never seen one go that quick or trap that speed. Just trying to figure out why there is 10MPH variance between bone standard cars. Only things i can think of are large altitude differences and the fact that a few of the US tracks aren't exactly "flat" (read: downhill).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...