Jump to content
SAU Community

Buying A 32 Gtr, Looking For Mechanics...

JimmyRickard

By JimmyRickard,
in New South Wales

 Share

Recommended Posts

JimmyRickard Mentor

JimmyRickard

Posted
Posted

I'm currently in the market for an R32 GTR. A mate of a mate is sellng his, so I went and had a look at it and was very impressed. The paint was in good condition, the body was straight (as far as I could tell) and completely original inside and out, which is what i'm after. The engine has had a complete rebuild, with forged pistons etc, but not highly boosted (9-13psi from memory), and an intercooler and the rest of the usual stuff. All in all it looked and sounded good. The guy took us for a drive and the car didn't miss a beat, seemed a bit docile when not on boost but pulled hard when it was. Anyway, my brother who is a mechanic of sorts found it to be in pretty good condition and we were both impressed with the car.

However, since its an '89 model, I dont want to take any risks. The car's in Sydney, and i want to take it to a skyline specific workshop to get it looked over, or have someone come out or something, and get the engine/gearbox checked out specifically. I get the feeling there may be no receipts or warranty from the engine rebuilder so i want to be sure.

Can you guys suggest any workshops or mechanics in the SYdney area?

What are some other things I should be looking out for?

Cheers!

JimmyRickard Mentor

JimmyRickard

Posted
  • Author
Posted

Seeing as BEL is around the corner in regents park i might go with them.

Are these guys very familiar with Skylines?

What kind of inspection should I be asking for, and how much will I be looking at getting all this stuff looked at?

Also, anyone know where i can get a wheel cap fot the original wheels? Its missing one of the caps "we produced on spartan air" or something.

Blitz Grand Master

Blitz

Posted
Posted

As above, call Croydon Racing Developments and speak with Jim or Lance - 96484264

I have had a full pre-purchase inspection done there for the buyer of one my previous Skylines and they were extremely thorough. Their inspection includes everything from a full body/chassis inspection, to Dyno and engine check.

TTT Grand Master

TTT

Posted
Posted (edited)
Southwest sydney area, the car's in greenacre so somewhere in that area

sounds like a good enough reason not to buy it..

make sure all the numbers are checked.

vin, engine, rego.

I think there is a way to see if a number has been filed off and re-punched too.

get that check

check for new welding around the firewall.

Edited by GTST
JimmyRickard Mentor

JimmyRickard

Posted
  • Author
Posted (edited)
sounds like a good enough reason not to buy it..

make sure all the numbers are checked.

vin, engine, rego.

I think there is a way to see if a number has been filed off and re-punched too.

get that check

check for new welding around the firewall.

Which is why i want it fully checked out. I'm going to have a look at a few others first before I make a decision, but from what i've seen it's in great condition, and with the work its had to done to it, its going pretty cheap. However i'd prefer a more expensive, better quality GTR as opposed to a cheap shitbox, so i'm keeping my options open. A mate put me onto this guy, so i'll give him the benefit of the doubt (before any money changes hands anyway).

Is it worth doing a leak-down test? Or will a compression test and Dyno be enough?

cheers

ALSO: What kind of mileage is acceptable for these cars? i'm looking between 80-110xxxkms to be realistic, but some on Carsales have like under 60k which sounds like bullshit to me. Will the mechanics be able to give me an estimate of it's use?

Edited by bigjimmystyle
Beer Baron Grand Master

Beer Baron

Posted
Posted

32 GTR with less than 100,000kms is very rare. plenty of them show less than 100,000 but not many have actually done that few. I mean in 18 years 60,000kms... 3300 kms a year. hmmm.

I would get the leakdown test done too.

realistically you are looking at between 100-200,000kms.

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
Given the less-than-stellar attention to detail at the last BEL Garage dyno night, I don't think I'd be taking my car there....

For a thorough going over id take it to Croydon's as per Blitz' post

JimmyRickard Mentor

JimmyRickard

Posted
  • Author
Posted

Nah it's gunmental grey, looks completely stock.

I'll have a chat to the guys at DART and Croydon and make my mind up form there. More importantly I want to speak to the engine builder to hear what exactly he's done.

Thanks for the help guys!

  • 2 weeks later...
HighOnSky Newbie

HighOnSky

Posted
Posted

On this subject, I have a basically stock R33, and live in the Hills area of Sydney. The places suggested are a bit far away for me. Can anyone suggest a good place in this neck of the woods for servicing and repairs? Thanks in advance!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      boost source Size Garrett gt28 gen2

      By TurboTapin · Posted

      You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR · Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Rezz
      Spotted on the street....

      By Rezz · Posted

      Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...