Jump to content
SAU Community

Recommended Posts

hey phunky, yeah just saw the ignition dvd tonight, turned out good! and yeah you would love it there , certainly gets the blood pumping!!

hopefully we will try to get back there at the end of the year with the r34, all going okay

pauls twoogle , is one beautiful looking r32 too ! it's a credit to him.

ross, yeah, the oil to water oil coolers are great, we are seeing much lower engine oil temps now! before we were seeing up to 130 degree's!

cheers russ

I was going to bite... but.... what the hell. How could I ever compete with something like your R33 Michael. I can only dream of having the same budget, Power and Grip you do. So laugh away, Laugh at my skyline that can only have realy bad suspension geometry because it is so low. Or maybe I've read widely, spent hours making and developing my own parts to overcome the rollcentre issues and other normaly untuneable aspects of an R33.

So yeh, it is a drift thing that forces the guys at the pointy end of drift to research, make and test stuff to get thier cars to do what they want them to do. Because after all, what happens when drifters get over drift and start to explore other avenues of motorsport???? They get laughed at by knobs who think drifters are just silly kids with way too low cars.

i like drift, !

and our next car will be on the deck, none of the cars i saw in japan (other than ours) was more than about 2/3 inches off the deck.!! awsome

like you say just need to do home owrk on geometry an so fourth.

our next car will be on the deck, none of the cars i saw in japan (other than ours) was more than about 2/3 inches off the deck.!! awsome

like you say just need to do home owrk on geometry an so fourth.

Most of them don't know/care about suspension geometry, they just stick rediculous spring/shock rates in them and there is no movement, so geometry is irrelevant. Then they have to stick new super soft tyres on for every run in an attempt to mask the suspension issues.

You kicked most of their asses last year with a comparatively miniscule budget, almost zero practise and infamiliarity with the event and the circuit. Don't fall into the copy cat trap, take the technically superior high ground.

Cheers

Gary

Most of them don't know/care about suspension geometry, they just stick rediculous spring/shock rates in them and there is no movement, so geometry is irrelevant. Then they have to stick new super soft tyres on for every run in an attempt to mask the suspension issues.

You kicked most of their asses last year with a comparatively miniscule budget, almost zero practise and infamiliarity with the event and the circuit. Don't fall into the copy cat trap, take the technically superior high ground.

Cheers

Gary

gary you are absolutely spot on with those comments, it was the first thing we noticed with there set ups.

So yeh, it is a drift thing that forces the guys at the pointy end of drift to research, make and test stuff to get thier cars to do what they want them to do. Because after all, what happens when drifters get over drift and start to explore other avenues of motorsport???? They get laughed at by knobs who think drifters are just silly kids with way too low cars.
Yes! And if it wasn't for silly kids with low cars we wouldn't have parts like this.

photo.jpg

gtr_r_c.jpg

I mean really all they are doing is playing make-believe-GT-racer so they want their car to look like GT500 cars.

And tyres are cheap in Japan anyway, so slap in some steel rods, slam it on the ground and slip on some super softs! :(

Oh and if you get a chance run my signature (which i have had for ages) through Google Translate :D

車高の低さは知能の低さ!!!

http://translate.google.com/translate_t?langpair=ja|en

And below is my racing machine... it is slow, but fun

post-662-1207971861_thumb.jpg

Edited by Laurence

Not since I lost my licence for street drifting unfortunately... >_<

My old car had high rollcentres which is actually quite dangerous, I reckon if the roll centre is under the ground then the car can't roll above the ground! :/

post-662-1208003163_thumb.jpg

post-662-1208003174_thumb.jpg

Edited by Laurence

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...