Jump to content
SAU Community

Recommended Posts

hi

my race car toy (yes a girls car) but catch it if you can!!!!

260kw 850kg power to weight 3.2

post-37870-1234600006_thumb.jpg

dave

ps the other car is the bsm gtr :P

Aww that car is so cute!!!

It made me giggle last time I seen you out at OP...Awesome!!

Just got it home, havent even taken it off the trailer (neighbour is coming over after dinner to help) and im already posting pictures :)

nascup1.jpg

nascup2.jpg

nascup3.jpg

YAY!!!It's Finally here!! :/ Well Done :blink:

Go Ben!

Yup took 5mths longer than it should have because of the dollar crashing which caused a lot of headaches, long story short is instead of importing a brand new kit in pieces from usa (where they are made) i've bought there shop/demo car which is 100% turn key ready to race (well, if I could fit my fat ass into there sparco seat lol). Another bloke in Perth bought the other shop/demo car and that is all that is in the country and its likely to stay that way for awhile unless you want to spend $40k to buy 1.

Because of that its got the same engine used in the actual Aussie Racing Cars which is a 1200cc 125hp 5sp Yamaha motorbike engine. Yup a lot less power than the Hayabusa engine ive had sitting in the garage for the past 4mths but atleast this car is ready to go and if I need more power I can always do an engine swap next year after i've learnt how to steer it.

It weighs approx 540kg so it's not super light like a Radical or the Aussie Race Cars but its no 1500kg gtr, has a 1 piece fibreglass shell with removable engine/boot covers. Entry is via the hatch on the roof (like the american nascars have) has a normal pedal box, adjustable bias, autometer gauges, VL Turbo front calipers, VZ rear calipers with rotors from a Mustang, EBC pads and a fuel cell in the rear.

nascup4.jpg

nascup5.jpg

nascup6.jpg

nascup7.jpg

nascup8.jpg

nascup9.jpg

cool car ben! glad to see you got something finally. it is a shame they let you down so badly though. :D but hey, you've got 'a' car now so hop in and enjoy. take it up to maccas for some drive through I say....

(on the trailer of course...).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...