Jump to content
SAU Community

Recommended Posts

This is cheaper than buy+build a dedicated r32 gtr which I was doing before I sold it and bought this. It's also very basic underneath which is great for a mechanical novice like me, and if the motor blew it would be cheaper to just buy another standard engine than get it rebuilt. It's also faster than the r35 gtr around Oran Park so im happy with that pace for now :ermm:

This will use less fuel in a day than what my tow vehicle will to get me to the track and will be about 4000% more reliable and fun than a gtr. I wanted something that I could push off the trailer, have some fun, tow it home and park it until the next outing, not like a car which always needs more brakes, better suspension, more power and less weight that you could easily spend $5k on after each outing.

Who knows, might get in it and not like it at all, thats part of the experience.

Fair call. I wasn't knocking your decision at all.

I have also gone down the cheap non registered track car path so understand in that regard. Unfortunately i am in the process of throwing money at mine to make it faster even though it's a lot of fun as it is...

Ben,,,I love your thinking mate. Thats exactly the reason I bought the Radical.

Last year I did almost every NSW state hillclimb,,,every state supersprint,,,5 trackdays,,,2 practice days and the cars still fine.

I think the only part of owning her that may be a down side will be scaring the shit out of yourself. You will like it,,,trust me.

R35 GTR's pfft,,,I'll show you a vid one day. I'd hazard to quess there would be maybe 6 Skylines on SAU that would give yours or my car a run for there money.

Neil.

Was only just emailing someone saying that any good track car makes you do irrational things with scary sums of money. I have not driven my car at the track in 18 months, though it has still been on the road as i have been busy saving and compiling parts for the current goodness being thrown at it.

I would have been better to buy a new stock GTSt and throw all my good gear at it and had two cars for what the bodywork is costing me :sick: But i do love my car and it will always be my car...so could never replace it with another GTSt simply because it woudl be cheaper....you dont turn your back on good friends :P

I prey to fark that in 6 weeks when it is back on the road i can just enjoy one of the loudest cars at the track that is a hoot to drive. I have given up on the chasing times and gone back to focussing on making the car fun and cheap as possible (relatively) to run at the track.

If you dont mind me asking what are the kits worth or can you post a web site for a look.

Cheers

Well unfortunately due to the dollar dropping its ass over the past 6mths you won't get 1 of these for under $40k on track, because of this the Australian Distributor has put it on the back burner until the dollar goes back to something respectable. However for $40k you are starting to get into low end Radical territory which would be a nicer option :sick:

Here is the website for the American Manufacturer: www.babygrandracing.com

that looks awesome Ben!! Cant wait to see it out on the track mate!!!

I get my new toy next week when Im back from the US!!

Or should I bring one of these back with me...? lol

Well unfortunately due to the dollar dropping its ass over the past 6mths you won't get 1 of these for under $40k on track, because of this the Australian Distributor has put it on the back burner until the dollar goes back to something respectable. However for $40k you are starting to get into low end Radical territory which would be a nicer option ;)

Here is the website for the American Manufacturer: www.babygrandracing.com

Thanks for that. I'm at the stage were I have done a bit of work on the old 32 and now its time to spend the money on getting the set up right or do I cut my so far minimal loss' and save the extra for something like what you have. Hmmm the time to decide. :D

Cheers

Have done a few more bits and pieces to the car... the plan is PI on the 4th of April... *fingers crossed*

Making a template for the alloy boot false floor:

post-8405-1236208230_thumb.jpg

Finished floor

post-8405-1236208378_thumb.jpg

Box for the Fuel system:

post-8405-1236208259_thumb.jpg

Drivers seat and harness in. Love that seating position, shoulder below the door line :)

post-8405-1236208406_thumb.jpg

Brakes fitted and bled (Thanks Stu!)

post-8405-1236208297_thumb.jpg

post-8405-1236208348_thumb.jpg

That's the trap I guess... my car was fine before I pulled it off the road. Now I'm poor, haven't driven it for 2.5 years and it will be a little quicker...

i know that all to well although i blew my last engine up, now i havent driven my car for about a year and a half and just keep spending more money on it though it should be bloody fast when i finish it.

nice intereior setup on ur car phunky. have you extended your steering wheel out at all? it seem to come out a long way...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...