Jump to content
SAU Community

Recommended Posts

Got some of the R33 stripped on the weekend. just have to take the rear seats out, and the carpets now.

We have the same brakes and air compressors :P

And it looks like my rotors are on the wrong way, thanks for posting that pic up!

the slots don't matter, it's the direction of the vanes that's important. in the pic posted you can just see the curve/angle of the vanes is correct. phunky, yours may have the slots cut the other way in relation to the vanes. (ie with the rotors mounted correctly vane wise your slots may face the other way).

Good to see that everyone has been working hard on thier machines, as have I. I've been working on seting up a set of GTR throttle bodies and plenum on to an RB25. Not a job for the feint hearted. Finaly got a decent tune in to it today. No real power increase but emensly different fuel mapping was need everywhere and took the best part of the day. In the end the power comes on a little earlier in the rev range, has a flatter curve and moved peak power up by nearly 1000rpm in the rev range. Might be easier to power out of corners? will track test and refine tomorrow at morganpark.

Will post up some pics later. Off to do a wheel alignment for gatton street sprints and testing.

the slots don't matter, it's the direction of the vanes that's important. in the pic posted you can just see the curve/angle of the vanes is correct. phunky, yours may have the slots cut the other way in relation to the vanes. (ie with the rotors mounted correctly vane wise your slots may face the other way).

Mine are from a GT-R, and are the same brand of rotor, so I think they're on backwards... I knew I'd get it wrong :pirate:

Mine are from a GT-R, and are the same brand of rotor, so I think they're on backwards... I knew I'd get it wrong :pirate:

hehe, thats the second time your rotors have been put on the wrong way dane... i did it the first time they went on the gtr, didn't notice until it i'd put everything away and taken the car off the hoist!

This is my baby hopping to have it finished by super lap 2010 but it costs so such.

It has an RB30/26 Motec M800 Alcon's ext and it is all done by Ben at Race Pace Motorsports.

mumma mia! that's a spicy meatball you have there.

any more details? turbo(s)? suspension? it looks very serious, and very nicely done so far. no doubt it will be a weapon as ben certainly knows how to make a quick track GTR. :)

when it's finished I'd be happy to test crash... i mean test drive it for you... :P

Thanks for the thumbs up guys :ermm: .

The Turbo is one of Ben's custom T04Z's on a Race Pace manifold with an HKS 60mm gate.

The suspension will be a set of Bens custom tein's and all links will be Ikeya Formula

post-39805-1237366120_thumb.jpg

I have made an addapter manifold to mount a set of GTR throttle bodies and plenum for my RB25. It has worked quite well but not improved the area of the fine throttle response I was looking for. It has improved and moved the power up higher in revs though.

27022009.jpg

26022009_007.jpg

26022009.jpg

26022009_003.jpg

I'm going back to the old setup.

I have made an addapter manifold to mount a set of GTR throttle bodies and plenum for my RB25. It has worked quite well but not improved the area of the fine throttle response I was looking for. It has improved and moved the power up higher in revs though.

I'm going back to the old setup.

interesting, i went the rb26 plenum setup on my 25 and i gave alot of response.

Before the setup had full boost (16psi) at 3300rpm

after

Full boost (18psi) at 3000rpm

:sweat:

I'm using the blitz kit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...