Jump to content
SAU Community

Recommended Posts

Pity they're a cast iron boat anchor Al!! :)

Just jokes, I am jealous of your RB25/30 power outputs but not the extra weight involved... but you have 160rwkw's more than me at 100km/h... that's depressing ;)

Try Winton out in October mate, hopefully we'll get some decent weather.

Ben: lol :D

That was more of a "dig" at Bris :)

I also wouldn't fark the balance of a 180, by fitting an rb into it.

When flat footed, in 3rd, things get "interesting" at about 80km/h.

October hey.... Any threads up yet? What type of track day is it?

We all know that an rb30 conversion is where it's at! :P

Slap on a 550hp Garrett and you have 320+rwkw with better response than a std/factory rb25 setup :P

I am tempted to take mine to the next Winton track day, whenever that is, have been giving some serious consideration :bunny:

Below is an older power curve. My car now makes 330.6rwkw with even better response and more torque; as we have since adjusted the cam gears and done a retune

I will post it again. RB30s are for people who rather roofies then romance and who think handjobs off hookers isnt include as paying for sex

May be time for a used OS Giken SR20 gearset. I have been on the lookout. If i find some i will let you know.

Blolody VLs and Silvias eating up the supply of engines and gearboxes...also the bloddy R31 GXE crowd :(

LOL, there,

Do NA R33 boxes fit and share the same ratios?

May be time for a used OS Giken SR20 gearset. I have been on the lookout. If i find some i will let you know.

Blolody VLs and Silvias eating up the supply of engines and gearboxes...also the bloddy R31 GXE crowd :)

LOL, there,

That sounds easy to find mate... lol

Interestingly, popped over to my race car building mate over the road yesterday, he has a partially busted 6 speed HKS GTR gearbox there. The transfer has been cut off it for RWD. It's not a getrag, its an early box.... I'd nearly forgotten HKS did thissetup, they did didn't they? lol

Anyone know where to source the bits to fix it, who made the stuff? it's wierd, it has oval dogs instead of Aussie style back-ground dogs.

well an update for my silvia.

I'm taking some time off in the next couple of weeks to sort out a few little things on it.

install some cams. going to go with greddy easy cam, 256 in 264 ex 10.5mm lift on both

install exhaust tip extension. yes it sounds gay but currently exhaust doesn't extend past the uras bar and it's getting destroyed (fatz give me back my tip you carnt)

get air con re-gassed. NEED AC!

get diff backlash set properly (diff whine is annoying)

raise height (yes it looks awesome low but the trust PEII exhaust is getting destroyed and I think it will handle better with some suspension travel)

install some new seats, either 32 GTR or 34 GTR for street duty, will keep current race seat for track use

install the Trust intercooler kit and piping I've had sitting around for it for ages.

may swap out the walbro fuel pump for a nismo or sard (it seems ok, but I just have no faith in them, it would not have been my choice)

may need to upgrade the nismo 555cc injectors to some blitz 850cc ones. especially if I go for an E85 tune.

may swap out the HSD coil-overs for either some buddy club racing spec dampers or some cusco zero 2s. both are quite good.

then get it tuned to about 22 or 23psi with the cams and new intercooler and piping hoping it will crack out a fat 250rwkw on pump 98. and if I'm keen I may get an E85 tune and go for 270 or 280.

BIG LIST! but it's going to be so cool when finished. oh, and will get the front bumper repaired from where troy farked it... lol.

Was thinking that the ride height is nice and low...i know i run mine higher and it looks gay for it. I am not fast so have to remember to look and sound it ;)

I have another date with a Caterham, this time an R300 race car. I wonder if the magic has worn off or after driving it i am still going to be hungry for one?

Sorry I'm late guys, but I measured those ride heights for you.... centre of wheel to gaurd.

Front - 322mm

Rear - 332mm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...