Jump to content
SAU Community

Recommended Posts

Hi there guys, i need some help!! I have a r32gtr and it has aftermarket turbos injectors computer etc and i was giving it heaps in 2 wheel drive lke reving its tits off and i pulled up in the garage and popped the hood and there was oil everywhere, I freaked out and did not know what to do. I looked at the dip stick and it was sticking out a little and the oil was all around that area and the engine bay. What does this mean????

1 Maybe too much oil in the car

2 No catch can fitted

3 What happens when you rev the shit out of these engines

I dont know can anyone help me please???

Link to comment
https://www.sau.com.au/forums/topic/179827-oil-everywhere/
Share on other sites

sound like a over pressurized sump to me. 2 things would have happened, blown rings or ring landings, high reving pressurized sump but little to no damage (very lucky). chuck some more oil in her and if it is still blowing a engine rebuild is needed. could also do a compression test first.

Link to comment
https://www.sau.com.au/forums/topic/179827-oil-everywhere/#findComment-3272960
Share on other sites

Have went out and given it heaps again and it seems to be fine now, i had it serviced and i think there was too much oil put in it, can it react in this way because the car still has a little over full even after loosing quite a bit of oil, maybe 500ml of it??

Link to comment
https://www.sau.com.au/forums/topic/179827-oil-everywhere/#findComment-3273633
Share on other sites

Have went out and given it heaps again and it seems to be fine now, i had it serviced and i think there was too much oil put in it, can it react in this way because the car still has a little over full even after loosing quite a bit of oil, maybe 500ml of it??

yeah it can.. .i've never experienced the dipstick moving, but my oil was overflowing into the catchcan... over 1ltr, so it was spilling out of the catchcan... after a leak down test, it turns out one of the cylinders was less than perfect....

so i'd get it check if i was you... for me it was ONLY happening under hard right hand turns (at a track) so we wouldn't have picked up on it, if not for that!

edit: should add, i had the normal amount of oil in, so maybe it is just excessive oil for you... to be honest, its not something i'd risk... get it checked out!

Link to comment
https://www.sau.com.au/forums/topic/179827-oil-everywhere/#findComment-3273667
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...