Jump to content
SAU Community

Recommended Posts

Here some information about the nismo clutch (got from the nismo catalogue)

SUPER COPPERMIX

Allowable torque of 54 kgfm for dynamic friction (station friction: 81kgfm) Handles an estimated allowable power of 420PS

This is a single clutch system that takes "the ease of use"and "high power handling"forte of COPPERMIX to the next level.. This series also includes a lineup of standard specification products that can handle 380P

*NISMO standard measurements taken by combining high-power specification with the SR20DET engine.

Lightweight flywheel - Equipped with a lightweight flywheel manufactured form special chromoly, the ideal weight has been provided to ensure torque

Aluminum Cover - A cover made from a special aluminum with excellent heat-radiating powers is used

Center Plate with strap Function - To deal with unlikely occurrence of misshift, the center plate features a strap function

SUPER COPPERMIX TWIN

Allowable torque of 84kgfm for dynamic friction (station friction: 143 kgfm) Handles an estimated allowable power of 670PS

The multi-plate clutch takes "the ease of use" and "high power handling"forte of COPPERMIX to the next level

*The numerical values are NISMO standard measurement values measured using a push-type clutch combined with an RB26DETT engine. Evaluation were made based on street and circuit conditions. No quarter-mile evaluation was conducted

Lightweight flywheel - Equipped with a lightweight flywheel manufactured form special chromoly, the ideal weight has been provided to ensure torque

Uses an aluminum cover and lightweight flywheel as a set - A special aluminum cover weigh excellent heat radiation is employed. Also, this is combined as a set with a special lightweight chrome-molybdenum flywheel to achieve the ideal weight setting for the attained torque.

Center Plate with strap Function - To deal with unlikely occurrence of misshift, the center plate features a strap function

Hope it helps :)

Cheers Michael

thanks Michael but does this apply to the clutch kit also ? and 380P is that hp ? and whats 420PS mean. sorry i've got no idea on clutches. thanks

and what would be the difference between a copper mix and a non asbestos clutch ?

Edited by nsm034

thats good to know thanks heaps for your help :) micheal . heres a link to the one i'm looking at

http://www.perfectrun.com.au/performance%2...tsclutchkit.htm

i'd say copper mix is better because it's dearer. :mellow: would that be a fair asumption ? ha

Hey mate,

Im looking at the same clutch kit, they sell it without the flywheel for about $500 also. Just want to know, what are ppls thoughts on the advantages on a flywheel? Do you guys believe there are any power gains to be made on a dyno? From what I've read there is no dyno difference however on the street, it is like having 101lbs less weight on the street???

Edited by MR R34
I got a nismo twin plate + light flywheel and I hate it. Way too on off for city driving. I'm going to get it replaced by a single - already have nismo slave so should be heaps better for traffic.

Is this a Super Coppermix, or a G-Max or earlier clutch? Just trying to figure out which one you have coz the Super Coppermix is supossed to be the ducks nuts

I got a nismo twin plate + light flywheel and I hate it. Way too on off for city driving. I'm going to get it replaced by a single - already have nismo slave so should be heaps better for traffic.

Let me know if you wanna sell it

It's a Nismo Gmax Item - I'll have to find the version number. It's not too bad while your moving just annoying to drive to and from work and stopping at lights etc. Which is basically 90% of my driving - I'm rebuilding engine at the moment so I'm keen to replace it with a decent single.

Let me know if you wanna sell it
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...