Jump to content
SAU Community

Recommended Posts

I am interested in a high flow of an Rb25 turbo, as long as there is not too much involved with getting the lines altered.

Is there any people in for definate yet, or is it still all in the process at the moment?

Thanks,

Abu

Ok people, ive spoken to John again and this is the go. With the JOURNAL bearing high flow for $1100, you need to provide John with your turbo and the actuator for it to be highflowed. You dont need to provide the LINES as you can use your stock lines. Now if anybody wants a ball bearing these will be $1550, but five people are needed to purcahse this. With the ball bearing, you need to provide the lines as John will modify them. Otherwise you can do it yourself. Everything else, as in bolts, washers will be provided to bolt back on to your turbo. There is not a lot of mucking around.

Heres all the information you guys need. So is anyone in?

SoFly and Munkey: $1550 for ball bearings on the condition that we get five. You need to provide your oil and water lines to be modified though.

Abu: If you get a journal bearning, all you need is the turbo (with actuator) as the lines do not need to be modified (turbo is only oil cooled anyway). If you want ball bearning, you need to supply the lines, and they will be modified as part of the cost

Cheers

Great to see you guys dealing with Precision Turbo's again! My GB sparked approx 40 high flows all with excellent results!

Good luck to all

Regards,

Sarkis

I installed one of Johns BB R33/VG30 highflows on the weekend.And honestly cant wipe the smile off my face.

The car will be tuned Monday week so ive just been driving around off boost and occasionally creeping into the 2psi range.Very torquey an boost starts at about 2000rpm.Had to go to Pirtek to get some braided line made up,but its DEFINATLEY worth the effort.

With the cams,555s and Z32 that will be installed next week with the tune i will probably hit 270rwkw at 1.2bar.

If you can stretch your budget i would seriously consider the BB option!

There was a delay at UAS so i wont get my car back till Wednesday night.

Suspense is killing me!

What i know so far is that the boost will be set on high at 16psi and low at 10psi.

Should a safe and solid tune.Im hoping for 260rwkw.

Hey guys.

I know not everyone has the priveledge of being able to get a turbo at wholesale price, but I recommend making friends with someone that works at Repco, cos I can get a Garrett GT30RS Twin BB for approx $1300 - $1400 through a friend. I dunno, it seems like a lot of money for a journal bearing turbo. Im currently running a journal bearing unit with VG30 housing and im not happy with the amount of lag, but I only payed $800.

Im not trying to be a dick, just throwing some other ideas into the mix. Even at RRP I reckon a new twin BB unit would be worth the extra few hundred.

Croydon are doing some really good prices: http://www.skylinesaustralia.com/forums/in...howtopic=169697

Scott

Edited by datto260Z
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...