Jump to content
SAU Community

Recommended Posts

Hi All,

I've been looking hard, but can't seem to find an exact answer.

Do i NEED to upgrade my coil packs for 300-320rwkw?

Parts soon to be installed:

-HKS gtss turbs

-fuel pump

-600cc injectors

-Z32's

-full exhaust

-pfc

Car is stock (~90,000kms) at the moment and the stock coils seem to to run fine.

Any help appreciated

Cheers

Link to comment
https://www.sau.com.au/forums/topic/181106-aftermarket-coil-packs-for-r32-gtr/
Share on other sites

depends on how much boost you will running to achieve 320rwkws. i found anything over 18/20 psi my stock coils broke down. bought a dozen 2nd hand coils from the wreckers and sau and they all broke down at high boost. so i think it depends on boost/ age and condition that they are in.

You won't know until you try it. The stock coils can run at that power level but they are starting to age quite a bit so might start breaking down at any point.

Aftermarket coils (Splitfires) are so damn cheap these days (~$500) that its good insurance if you can stretch the budget.

alex buy sum Splitfires coil packs u cheap kunt :(

also to get over 300kw's u wont be needing 600cc injectors waste of money and fuel. 500- 560cc will do.

also a nice set of cam's will be nice

cheers

bill

My R33 SII (1996) coilpacks died when I decided 17psi wasn't enough on the stock motor and pushed it to 20psi.

I assume the WMI would have made it that little bit harder to light the fire too.

Replaced them with Splitfire packs and now 18psi all the way :(

Edited by The Mafia
alex buy sum Splitfires coil packs u cheap kunt :rofl:

also to get over 300kw's u wont be needing 600cc injectors waste of money and fuel. 500- 560cc will do.

also a nice set of cam's will be nice

cheers

bill

LOL Bill

Don't need cams, just cam gears!

I couldn't find any 550cc injectors for rb's anywhere.. can anyone help?

Cheers,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...