Jump to content
SAU Community

Recommended Posts

Yeah i do the same as N15MO, $2 at carlovers sometimes its $3.

Because you got to watch em.

When you use the high pressure soap it takes half ur bloody time to come out and when you want to wash it off it takes half the time for the soap to clear out and you have to put more money in to wash the rest of the soap off Grrrrr.

Edited by subzeroR33
  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

sure you can - what are they going to do? send you on your way?

although if there are people waiting i'll usually have coins going in. it would be annoying waiting for someone who is not paying. you could always soap it up while your waiting for other cars...

My car is dirty...cruise to boobs wash?

Don't talk to me about that boob wash!

A few months back, I wanted to pass a few trucks on Abbotsford Rd. took the inside lane and planted my foot... almost collected a pink mazda 121 with 'Nude Carwash' plastered all over it!

my bad for passing on the inside. now EVERY time I drive that way, I'm on the lookout.

Andy, Noel, looking for a full report! :pics or ban

Don't talk to me about that boob wash!

A few months back, I wanted to pass a few trucks on Abbotsford Rd. took the inside lane and planted my foot... almost collected a pink mazda 121 with 'Nude Carwash' plastered all over it!

my bad for passing on the inside. now EVERY time I drive that way, I'm on the lookout.

Andy, Noel, looking for a full report! :pics or ban

rofl. I dont even know where it is pear. besides, today is not a good day for a car wash. it would be covered in road splash by the time i got home.

I dont need to see flat boobs that bad. :laughing-smiley-014:

rofl. I dont even know where it is pear. besides, today is not a good day for a car wash. it would be covered in road splash by the time i got home.

I dont need to see flat boobs that bad. :laughing-smiley-014:

You wanna know how I know you are gay?

You will go and watch knuckle dragger's drive in straight lines at the drop of a hat but don't want to see flat boobs :rolleyes:

You wanna know how I know you are gay?

You will go and watch knuckle dragger's drive in straight lines at the drop of a hat but don't want to see flat boobs :rolleyes:

You didnt call me gay when i f**ked you last night. "Give it to me BIG GUY" wasnt it?? :laughing-smiley-014: :laughing-smiley-014:

You didnt call me gay when i f**ked you last night. "Give it to me BIG GUY" wasnt it?? :laughing-smiley-014: :laughing-smiley-014:

You are confusing me with Shane again! And I really doubt he said BIG

So sad how old age senility effects people :thumbsup: ha ha

hey guys i just bought my car and it was sitting at a wharf or some crap for a year and is really dirty and i tryed cleaning at the sar wash and even again at home and itstill pretty bad. where and how much would it cost to get a full detail and bring up the coliur and a engine detail??.

thanks

hey guys i just bought my car and it was sitting at a wharf or some crap for a year and is really dirty and i tryed cleaning at the sar wash and even again at home and itstill pretty bad. where and how much would it cost to get a full detail and bring up the coliur and a engine detail??.

thanks

some cleaning wax should work for u.. unless it went past the clear coat.. has it.?

I tend to go to the Car Lovers on Logan Rd at Underwood later on at night through the week.

There's never a queue so you can take as long as you like and chamois in the bay under the lights. There's no staff there at night either to kick you out for bucket-washing or taking a muddy fourby through etc.

There's also a servo within walking distance if you need change! :)

I tend to go to the Car Lovers on Logan Rd at Underwood later on at night through the week.

There's never a queue so you can take as long as you like and chamois in the bay under the lights. There's no staff there at night either to kick you out for bucket-washing or taking a muddy fourby through etc.

There's also a servo within walking distance if you need change! :)

yeah i drive past that one often.. lots of lots ther and a vacuum too i think.. how much is it for a rinse with the Pressure hose?

My only advise. Go to Carlovers if you don't want to pay too much, do it yourself NEVER use the brush unless its on the wheel arches of your muddy 4wd. By a decent wash mit and microfibre chamois so as to not induce swirls.

I have found a certain carwash at a certain Albion location that induces swirls and then offers you details to remove them...how nice they are.

If you want to see swirls, click on the link in my sig and find the black evo with 15,000kms on it and see what bad car washes can do...

some cleaning wax should work for u.. unless it went past the clear coat.. has it.?

no i dont think i have its just really dirty and has alot of sratchs. but yea ill be trying a polish and wax soon and ill see how i go.

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...