Jump to content
SAU Community

Recommended Posts

i think its the fanbelt/engine belt thing or something im not sure, i looked down at it the other day and it says "mitsubishi"??? is that right?!?

i have tried spraying it with wd-40 a few times it works for a day or so then it squeeks again, its really loud and really anoying it has been pissing me off for along time, anyone know anything about it or how to fix it?

after driving the car for 3-4 minutes it stops, when its cold its really loud, im guessing this has to do with something heating up and expanding or someshit i dont know

its a 97 r33 non turbo.

:action-smiley-069:

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Yeah i had something like that too but the squeaking only happened when i depressed the throttle. And after pressing and depressing the throttle a few times when cold the sound disappears. Only happens ocassionally though :P

mine does it after its been sitting for a while (overnight, maybe 6hrs+) but not if the car has been running slightly earlier.

^^^ mine is exactly the same

the reason why i put wd-40 on it is because i called up the place where i got my car from and the guy told me too, as i know nothing about cars.(hell i dont even have a toolbox) i did what he said.

but anyway sweet as il book it in at a place my gf gets her car serviced, aparently they are really honest and cheap...something hard to come by these days when dealing with mechanics

edit:thanks for your help guys, this problem has been pissing me off for months its so anoying waking up getting in the car half asleep and then having to listen to an ear pearcing screech, and even worse when you have to go somewhere late at night (maccas or something) and you live at the bottom of the court and wake up every single neighbour.

Edited by thorpe84

i'd say if its squeeking really loudly like high pitch styles then its too tight - hence when u spray WD on it the sound goes away

had that problem with my rb20 when i first got it

there's an adjuster in front of the wheel - from memory it is a horizontal screw with an L-type bracket on it. depending which belt i'm, - just going from the top of my head. loosen that just a little bit and you should be right.

If you're not confident doing it then just take it to a mechanic. a decent one shouldn't charge you much if anything for it.

cheers hope it helps

Its the alternator belt... mine did this too..

Its really easy to adjust.. If you're near Rosanna i can do it for you...

However if the belt is old and cracked.. its time for a new one

Here you go

1) Loosen bolt 1 with a 12mm socket or spanner

2) Tighten bolt 2 with same spanner

3) Check belt tension (if its tighter you've done it right)

4) Tighten bolt 1 again

alt1.JPG

alt2.JPG

Edited by MotoMan
Its the alternator belt... mine did this too..

Its really easy to adjust.. If you're near Rosanna i can do it for you...

However if the belt is old and cracked.. its time for a new one

X2 , u can get this belt grip stuff but it only a stop gap

f**ken sweet! il try fixing it myself tomorrow.

the belt it VERY tight, i think? i dont know really as i have nothing to compare it too...apart from my gf's n12 pulsar?

il try losening it, then tightening it, see what works best it carnt be too hard.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...