Jump to content
SAU Community

Holiday Auto Magazine Print Next Gtr Engine Specs?


Recommended Posts

Could this be yet another Japanese magazine printing a wish list + photoshops as an article claiming to be the real specs or will this be the final engine spec??? Who knows:

http://www.7tune.com/?p=106

Holiday Auto broke the news about the existence of a VR based GT-R engine last month, and since then has gone one further and given us a actual alphanumeric designation: VR38VETT. The VR38 is actually a recreation of the famed VRH35L V8 powering the R390 Le Mans car albeit in V6 form. A lot of knowledge gained from Group C and endurance racing has allowed Nissan to take the performance aspect of the GT-R that little bit further (over say, a VQ based engine) by taking the basic design of the VR38 and using it for the new GT-R’s V6 engine block and cylinder heads. A surprising feature of the twin turbo system is the ‘Integrated Exhaust Manifold Turbine’ where the exhaust manifold and turbo exhaust housing are formed as one piece. We’re told this is for weight saving, packaging and high response and was chosen over the more costly ‘motor assisted twin turbo system’ that was predicted way back in mid-2004. What all this has resulted in is an engine design that could be viewed as two 1.9L straight 3-cylinder DOHC turbo engines joined by a common crankshaft, with separate intake manifolds and throttle bodies for each bank. The intake manifold is actually the centerpiece of the engine bay, its intake runners being used as a design feature of the VR38VETT as shown in the CG mock up image shown below.

gtr3.jpg

Hey i see they're using those new "blembo" brakes i hear so much about

Less torque than a 911 Turbo, and heavier :)

not looking good

p.s I notice the price for a GT-R comes out at $142,250 if you take the values of each in Yen, and then transpose the price of a Turbo in Australia into the equation. hmmm....

Don't get too depressed, those are just Holiday Auto's estimates. They said themselves that it was what they expected the specifications to be and might differ slightly. How much? Who knows... just wait until the end of next month :)

The VR38 is actually a recreation of the famed VRH35L V8 powering the R390 Le Mans car albeit in V6 form. A lot of knowledge gained from Group C and endurance racing has allowed Nissan to take the performance aspect of the GT-R that little bit further (over say, a VQ based engine) by taking the basic design of the VR38 and using it for the new GT-R’s V6 engine block and cylinder heads.

I find the second half of that paragraph to be a bit specious, though.

Firstly, the R390 hasn't been raced since 1999 and no-one else has used that block for racing since. So that's almost 10 years of no R&D for racing applications. The game as moved on a lot since 2000. The VRH block is based on the VH45DE, which is still in production....in luxo barges.

Hardly a test bed for a supercar engine.

The VQ block, on the other hand, has been the SuperGT powerplant for Nissan since the RB was removed from the GT500 Skylines in 2003, and continued in the FairladyZ's. The VQ30DETT is currently Nissan's engine of choice in Japan's top-tier motorsport category.

Given that the VQ is the current "racing pedigree" design, and doing quite well, I'm not entirely sure I can see how the abandoned VRH gives Nissan "more performance headroom".

I find the second half of that paragraph to be a bit specious, though.

Firstly, the R390 hasn't been raced since 1999 and no-one else has used that block for racing since. So that's almost 10 years of no R&D for racing applications. The game as moved on a lot since 2000. The VRH block is based on the VH45DE, which is still in production....in luxo barges.

Hardly a test bed for a supercar engine.

The VQ block, on the other hand, has been the SuperGT powerplant for Nissan since the RB was removed from the GT500 Skylines in 2003, and continued in the FairladyZ's. The VQ30DETT is currently Nissan's engine of choice in Japan's top-tier motorsport category.

Given that the VQ is the current "racing pedigree" design, and doing quite well, I'm not entirely sure I can see how the abandoned VRH gives Nissan "more performance headroom".

The VQ30DETT is Nissan's current engine of choice for Japan's top-tier motorsport category did you say? You're a bit behind the times there :kiss:

Did you also not read this part:

...the VK45 from the Nissan President wasn’t an engine worthy of the ‘R’ in the GT-R’s badge. Although it could satisfy the power, torque and driveability deemed necessary for the GT-R, the way in which it delivered those attributes was more befitting of a large saloon than a GT car. There was also a status problem, the VK45 being associated with Nissan’s luxury sedan would cause problems with potential GT-R buyers who were looking for more exclusivity… well exclusivity is what they got.

... it's not entirely about super dooper RB26 busting performance. Exlusivity plays an equally big part as does ultimate performance. Thats why the engine isn't a VQ, and that's why the engine isn't a VK.

It's funny you say the VRH35L is hardly a test bed for a supercar engine when the VQ has been ditched this year in favour of a VK for the GT500 Fairlady Z. It's not like Nissan had a few 1999 VRH blocks lying around and has 'blown off the dust' and used them again 8 years down the track. The new engine - according to Holiday Auto - is a recreation of the VRH35L albeit in 3.8L V6 form with VVEL (2007 tech right there), twin turbos with integrated exhaust manifolds (never heard of that before), semi-wet sump, and Euro 5 compliant emissions. So the game has lifted since 2000? Good thing the new GT-Rs engine has too :D

Btw, the VK is based on the VQ, not the VRH (VH)

I think the pic they have in the article looks hideous compared to the ones pictured in videos recently. I'd say the video evidence is a lot closer to the mark - otherwise why would they cover half the car up? The one pictured isnt' covered up at all, which is a dead giveaway that its not the real deal.

And until now we've been told it is a VQ based engine - 3.8L twin turbo, so who knows who to believe. Nissan apparently haven't been telling anyone anything so this article is as much a guess as any other info you might read. Until the tokyo motor show this year we'll know nothing.

And until now we've been told it is a VQ based engine - 3.8L twin turbo, so who knows who to believe.

Nissan apparently haven't been telling anyone anything so this article is as much a guess as any other info you might read. Until the tokyo motor show this year we'll know nothing.

Yep you're right. Just one thing... theres hundreds of thousands of people who want to know beforehand. So these articles cater for those people... whether they're right or wrong.

October 24th is going to be the acid test day for Holiday Auto.

Well we all know what it looks like from this video:

Price looks to be $80k for japan.. if it ever gets released here expect a price 30k or so above that I'd imagine.

The release date in Japan for the new GT-R has been confirmed for 24th October 2007.

official pricing and has also been released in japan

Nissan dealers have said to expect a cost price of 7.7million yen in JAPAN drive away, but that does not include registration, taxes and importation to other countries, which could increase the price upto 30-40%

twin turbos with integrated exhaust manifolds (never heard of that before), semi-wet sump, and Euro 5 compliant emissions. So the game has lifted since 2000? Good thing the new GT-Rs engine has too :laugh:

Btw, the VK is based on the VQ, not the VRH (VH)

yaeh you have. the old holden calibra turbo had it. and im pretty sure the new astra turbo has it to. bit of an opel trick.

Could this be yet another Japanese magazine printing a wish list + photoshops as an article claiming to be the real specs or will this be the final engine spec??? Who knows:

http://www.7tune.com/?p=106

gtr3.jpg

Hey i see they're using those new "blembo" brakes i hear so much about

lol @ blembo!!!!!!!

  • 3 weeks later...

add 101yen exchange rate, that makes a 997 Turbo ~$180k AUD. They retail for $330K+

so how you extrapolate that to a GTR price is anyones guess, because going by that, you roughly double the price (53% or multiple the yen price by about 1.47 to get a rough Oz showroom price) . Making an Oz delivered GTR $115K from the Porsche calculations

But Porsche make money off their cars, i don't know if Nissan would be hunting for a net profit on just 1 unit sale (before servicing, parts, etc)?

i like that price

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...