Jump to content
SAU Community

Recommended Posts

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

get a friend to sit in the passenger seat while you're at 260 and stick bits of paper everywhere till it stops...if that doesn't work, jerk the wheel to the left 90degrees and it should get the parts behind the dash to settle into their factory positions...

hey, i've noticed that once im going over about 260 there is a really weird rattle that for all I can tell seems to be coming from the airconditioning vents. Is this normal, or should i be concerned?

To fix this; stop car put it in neutral and put a brick on the accelerator so that it stays to the floor (ensure rev limiter is removed) then leave it like that for bout 1hr, should sort it out! To fix it even better take to your intercooler and exhaust with a hammer first to inhibit air flow, its good for rattles!!

Goodluck

Edited by r32line
lol . May i ask what your tacho is at when at 260km/h.

My R33GTS-T is limited to 180km/h and thats doing about 5000rpm in 5th gear.

it shouldnt be reveing that hard im sure mine doesnt

mine cuts out at 6500rpm in 5th , it like a second speed cut dunno what speed its doin bout its way off the clock somewhere , i have the speed cut on a switch mine sodest rattle at all at this speed been told by a commodore drive it was about 250?

I find my penis enlarges every time i brag about high speed on a public forum...

and ive done ALOOOOOOOOOT of bragging* :thumbsup:

*may or may not be true.. please consult a doctor if symptoms persist

Edited by MotoMan

hey went for a drive this morning, and your right jutstar my r33 does bout 4800rpm at 180k

Does any one know what the second speed cut or what ever it is that stops ya goin faster?????????

:) I thought you were going to lock it?

The speed cut thing usually goes in slightly after 180km if at all as far as I know.

More like the speedo's are ambitious at best at that end of the scale.

Why lock a thread as excellent as this?

yeah i was running some stockies off a ba falcon not sure what size they were , pretty tall though think they were 225-65-or 75 r16 or something it took a while to get the last 50k in 5th though, so does any one know whats the second cut is? its not the rev limmter.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...