Jump to content
SAU Community

Recommended Posts

OK back on track.

Apparently my Power steering rack is weeping oil from the pinion seal.

I found this on some site:

Yes, you can replace just the "boots" on the end of a rack-and-pinion steering provided that the mechanism is not damaged. Unfortunately, the boot is just a dust cover and if the inner mechanism has started leaking there really isn't much that can be done without completely disassembling the mechanism. The fluid in a rack assembly is under pressure from the power steering pump and once it starts leaking the rack is pretty much "done".

Is this true?

Iain do u still have the steering rack from the wreck? does it really matter? I can see the fluids are a little low but I can just top it up I suppose..

yeah i have it, but at the moment its being used in a jig

as for people looking for M35 stuff, there is an entire forum for this exact thing. we have just been a little lax in creating the FAQs. but its there if you want to browse or add info to it

yeah i have it, but at the moment its being used in a jig

as for people looking for M35 stuff, there is an entire forum for this exact thing. we have just been a little lax in creating the FAQs. but its there if you want to browse or add info to it

That forum is good, but there's information on here that isn't on there and vice versa. it's just another forum to visit...

OK back on track.

Apparently my Power steering rack is weeping oil from the pinion seal.

I found this on some site:

Is this true?

Iain do u still have the steering rack from the wreck? does it really matter? I can see the fluids are a little low but I can just top it up I suppose..

Not to keep it too on topic with M35 info; but you've just reminded me that we noticed this on my car a couple of months ago - and it was no worse many weeks after that iniital spotting (when we did my sway bars). A very slow weep. Fluid levels are still fine also. Would be interested to know the verdict on how much a new rack might fetch. Theres been a few M35s wrecked in the country, and several brought in for parting out - and yet we're still not seeing an abundance of parts avaliable >_<

Does anyone on here have the 3 nismo gauges that are in the center console in white???

Mike.

Dunc does if you want to check them out on a local car.

Like Josh said, they're pretty easy to get on IM. Always a set there.

Cheers guys, i already have a set but as i have a Nismo dash i would love a set of white gauges to match :D

You could always get Jesse to get a price off Nissan Japan/Nismo?

Part number is 24845-RNM50-W and I think they used to be around 23,000yen

Here's a handy little Nismo parts page :)

http://hirano-tire.com/brand/nismo/paji272.htm

OR even better, just for to http://hirano-tire.com, click on "Search by logo"... and kiss your afternoon goodbye :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...