Jump to content
SAU Community

Recommended Posts

Those of you running some sort of digital gauges, what do you use to do so?

Does the M35 use OBDII? Can you get an accurate boost figure from this?

Greddy infometer seems to be the most common ....and we know it works....OBDII is correct!

but no boost unless you get the extra right?

yeh you will need the greddy boost sensor and cable to plug into the sender/receiver from the informeter.. oil pressure /temp and stuff also, but I think theres only two extra options you can have.

If I don't use an Informeter, is there a way to get accurate boost measuring to the OBDII port?

i dont think there is bud. im pretty sure we would have it on the informeter if you could.

maybe just go the oldschool way and get a Boost gauge

Yeah I'm trying to avoid a physical gauge.

Current plan is a tablet like a Samsung Galaxy Tab or Viewsonic ViewPad and some peripherals to replace my Pioneer deck/GPS, and you can run an OBDII client such as Torque on there.. https://market.android.com/details?id=org.prowl.torque&hl=en

It's not an iphone app, and I think you meant "necessarily".

The variant of the OBDII protocol that our M35s use isnt 'common' - and as such, we've not seen too many apps/readers/scanners/etc that are 'OBDII compliant' work on our cars :(

The variant of the OBDII protocol that our M35s use isnt 'common' - and as such, we've not seen too many apps/readers/scanners/etc that are 'OBDII compliant' work on our cars :(

Works for the 350z guys with a few issues (this is the most informative post)...

As per kspann's demands, here is my brief review. I only tested it out for a few minutes today in a parking garage, but this is what i gathered. The ebay OBD2 adaptor works decently for what it cost. It lost the connection a couple of times, but quickly and automatically reconnected without any trouble. the code scanner works. It automatically scanned for trouble codes and none were found. Most of the sensors work, too.

Some of the fuel system sensors didn't work. Fuel trim bank 1 sensor 1 & 2 worked fine, but 3 & 4 didn't show up. Fuel trim bank 2 sensors 1 & 2 showed a constant 99.2%, I don't know what thats about. Also MPG, fuel pressure, and fuel % didnt work.

Sensors that did work include throttle %, timing advance, engine load, mass air flow rate, intake manifold pressure, intake air temperature, engine coolant temperature, acceleration, and MPH. I didn't try the turbo boost gauge or O2 volts sensors.

I was only using the free app, so I wasn't able to use the "dyno" and 0-60 time. As for the troubles with missing sensors, there is an option to add PIDs so you can monitor anything processed by the ECU. Overall, you can probably get a better OBD2 bluetooth adapter for a little more money, but i think this one will work just fine for me. Torque works great as a simple alternative to some of the expensive multigauges out there and as a cheap code scanner.

P.S. It does eat up a bit of battery, so you might want a car charger if you use it a lot.

http://www.350zmotoring.com/forums/off-topic/60500-torque-android-app-2.html

EDIT: Found this too.. http://g35driver.com/forums/g35-sedan-v36-2007-08/390921-torque-obd-app-plk-kiwi-mini-review.html

Edited by jasevr4

I've got an Informeter, and while its pretty good at what it does, it becomes expensive when you want to add on sensors.

You have to buy a harness to connect additional sensors, then the sensors themselves. For some you have to buy the cabling too. I have a list Greddy support gave me if you want, and prices from Streeter. Not sure if you can use the sensors wired to an Emanage through the optional serial connection? I know you can connect the Informeter to the Emanage.

I'm actually thinking of selling it now, as I'd like the additional sensors but I don't want to pay those prices just for the Informeter, then in some cases buy additional ones for the engine management.

I was looking at getting HKS CAMP2 (although its discontinued now, not sure if theres an update coming), and connecting it to the Fcon to use the additional Fcon sensors I've ordered. That way any extra sensors I buy, whether its for Fcon or just for information, can in theory be used for multiple purposes.

Might also look at replacing the deck already, so I can run multiple video sources into the back, and use the deck for CAMP2 and the stock screen for stereo/TV, or vice versa. Brad and I might have to have a little discussion about that...

Its in the car and ready to go, so if you want to see it in action, let me know. Sure Dunc can show you too.

  • 2 weeks later...

Good news today for PNM35 owners-

Cat Back exhausts from the NM35 series cars fit our cars!!!banana.gif

Don't know about PM35's, as the you have no transfer case, the routing/length of the front pipe may be different.

Good news today for PNM35 owners-

Cat Back exhausts from the NM35 series cars fit our cars!!!banana.gif

Don't know about PM35's, as the you have no transfer case, the routing/length of the front pipe may be different.

That's good news! What did you end up using?thumbsup.gif

I've got a HICAS light that will come on after 10 kms of driving which is exactly the problem found here http://www.skylinesaustralia.com/forums/topic/346023-1997-ecr33-hicas-light-on-after-10km-driving/.

Question does anyone know where the steering angle sensor (SAS) is located?

Well after 3 months, i've taken ownership of my AR-X and its in the driveway! I won't be able to drive till i've got a few things sorted (rego etc) but it's even nicer in the flesh. I'm stoked. It doesn't have the VDO but it does have reverse sensors, which for me at least, will get a heap more practical use.

Big thanks to Kristian from IronChef who was excellent to deal with and when things turned a bit sour, sorted the issue out, to his own detriment no less. I'd highly recommend him.

I'm going to let the dust settle for a week or two but then get onto Scotty for a dump, buy a filter, BC coilovers and upgrade the brakes. That'll probably do. I really want the Legalis cat back but it's $1500 from JustJap and that's just too expensive ... except it's perfect for what I want ... better performance but stock sounding and stock looking.

I understand a lot of them come over with only one key .... what did you guys do getting another one? just got another cut ?

Well after 3 months, i've taken ownership of my AR-X and its in the driveway! I won't be able to drive till i've got a few things sorted (rego etc) but it's even nicer in the flesh. I'm stoked. It doesn't have the VDO but it does have reverse sensors, which for me at least, will get a heap more practical use.

Big thanks to Kristian from IronChef who was excellent to deal with and when things turned a bit sour, sorted the issue out, to his own detriment no less. I'd highly recommend him.

I'm going to let the dust settle for a week or two but then get onto Scotty for a dump, buy a filter, BC coilovers and upgrade the brakes. That'll probably do. I really want the Legalis cat back but it's $1500 from JustJap and that's just too expensive ... except it's perfect for what I want ... better performance but stock sounding and stock looking.

I understand a lot of them come over with only one key .... what did you guys do getting another one? just got another cut ?

You are kidding, yes?

No chance the Legalis is stock sounding and I haven't seen many cars from factory getting around with two 90mm tips on a single muffler

I love the Legalis, but it ain't even close to stock

Straight off the Fujitsubo site

FUJITSUBO

Volume idling - (STD) 60dB (Legalis) 66dB

Proximity exhaust noise (4800rpm) - (STD) 81dB (Legalis) 86dB

3000rpm - (STD) 72dB (Legalis) 80dB

5000rpm - (STD) 81dB (Legalis) 85dB

4000rpm ~ 6000rpm - (STD) 96dB (Legalis) 105dB

You are kidding, yes?

No chance the Legalis is stock sounding and I haven't seen many cars from factory getting around with two 90mm tips on a single muffler

I love the Legalis, but it ain't even close to stock

Straight off the Fujitsubo site

FUJITSUBO

Volume idling - (STD) 60dB (Legalis) 66dB

Proximity exhaust noise (4800rpm) - (STD) 81dB (Legalis) 86dB

3000rpm - (STD) 72dB (Legalis) 80dB

5000rpm - (STD) 81dB (Legalis) 85dB

4000rpm ~ 6000rpm - (STD) 96dB (Legalis) 105dB

You could probably re-direct that comment to those that have said it is relatively quiet (bar the blitz NUR) on this forum.... maybe they're wrong? I disagree with you on looks though ... the standard has two tips and so does the legalis... now when you consider most rival tips looks like cannons then I'd certainly assert it does look close to stock in comparison.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...