Jump to content
SAU Community

Recommended Posts

What temps have people had their M35s up to?

Little worried last night's overheating might have caused problems. It seems fine, and I understand M35s run warmer anyway, just like to put my mind at ease.

I have seen 125 degrees with an airlock in the system, and 116 on the straight at PI. Hopefully no bubbles in your radiator or overflowing coolant reservoir and you should be fine. That said, I am rebuilding another VQ25det atm due to a blown headgasket from overheating...

I finally got the 350 x 400 x 50mm trans cooler in tonight, that should take care of the gearbox temps. I still have to install the fan controller, there is a 9 inch Spal fan on the trans cooler and a 14 inch on the engine oil cooler. Both fans should turn on at a preset temp once I wire it up. Not much room left in front of the radiator now... :)

I finally got the 350 x 400 x 50mm trans cooler in tonight, that should take care of the gearbox temps. I still have to install the fan controller, there is a 9 inch Spal fan on the trans cooler and a 14 inch on the engine oil cooler. Both fans should turn on at a preset temp once I wire it up. Not much room left in front of the radiator now... :)

Pic?

Very reassuring guys, thanks. Sooner I can get the Mishi in the better!

Funny thing about the coolant reservoir. Not sure I've ever seen the level change. Not sure if that is good or bad. Been the same level since I got the car 18 months or so ago.

Pic?

It was pitch black and beginning to rain, with lightning on the way. I was glad to have it finished before the storm hits. Shame there is no room for the hoist in the shed. :(

The trans had the thermostat inline and also ran through the radiator so there was no problem getting it up to temp quickly. I had issues keeping the temps under control though. The fluid comes straight out of the torque converter into the cooler lines, mine was seeing stupid temps as around 30kw is lost as heat in the converter at full noise, quite often enough to boil the coolant in the radiator.

I have removed the radiator fittings and thermostat from the lines so there will definitely be issues getting the temp up now. Hopefully it will still warm enough to drop into 5th fairly quickly, if not I will re-fit the thermostat.

Very reassuring guys, thanks. Sooner I can get the Mishi in the better!

Funny thing about the coolant reservoir. Not sure I've ever seen the level change. Not sure if that is good or bad. Been the same level since I got the car 18 months or so ago.

It will definitely rise once you double the amount of coolant in the system. What pressure cap are you running?

It will definitely rise once you double the amount of coolant in the system. What pressure cap are you running?

The Nismo cap. 1.3... Bar?

Car has never been overheated though, and I've never done anything to the cooling system... Until the cooling mod.

It must have had a large airlock in the system, you need to recheck the coolant when cold for the next few mornings any time you dump it and refill.

I took 2 pics for you guys, the fittings on both coolers are touching the plastic undertray so run the full height of the radiator. Hopefully the Mishimoto will still do its job. This is all possible due to the intercooler being cut down and moved forward, bolted under the intrusion bar.

post-63525-0-67975100-1354276986_thumb.jpg

post-63525-0-62217100-1354277003_thumb.jpg

I also got around to fitting the fan controller for both thermos and for displaying trans/oil temps. Kewish have asked me to modify a few of the signals going back to the TCU, including both temp signals and the main line pressure solenoid. Should be interesting to see what I can do manually with regards to line pressure, and the best part is, no more limp mode if the fluid gets too hot at the track. :)

I need to paint the control panel stealth black yet, if I cbf...

post-63525-0-67777100-1354796321_thumb.jpg

No Navi in the base model... ftw... :)

I can now run full line pressure, (farkin hard shifts), or factory adjustable line pressure with variable adjustment using the TFT temp knobs. Seems to work well on around 60 degrees from my quick play today. It's off to Kewish next Wednesday for pressure readings, I think they will be impressed with the mods. :)

So can i get one thing straight , these air bag like fault/issue lights come on basically due to 'cheap' wiring of sorts ? Or were they connected incorrectly , like the example with the person saying that their battery was going flat and then the airbag light comes on ? :S

Edited by RB25SEB

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...