Jump to content
SAU Community

Recommended Posts

I think it does need a street class. only problem is everyone who is borderline wants to make sure they fit into street rather than race

think you're on the money there...

Both classes will be won by a select few $100,000+ GTRs so dont get too carried away about prizes. Just enjoy running your car and find someone about your mod level to have a bit of fun with :P

thus i conclude have 2 classes - one for gtr's and one for gtst's :P

see you on the track roy! :P>_<

  • Replies 705
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Well hopefully Russ you'll get something down in print because Im building a Silvia at the moment to suit this format.

Also seeing it's looking like we'll be able to use Lakeside again late in 2008 I reckon with its twisty/challenging track layout that it would be perfect for the Qld rounds of the this particular Time-Attack series and perhaps an challenge could then be setup between the states.

Kind of a State of Origin except only Russell gets sweaty and wears short shorts...

It could be nice to have an interstate invite series.

Qld- Lakeside

NSW- Wakefield

Vic- Winton

Edited by Stupid Toyota

+1 for Lakeside! Far more technical and challenging. It requires a far more all round performing car than QR, which is all about power and brakes. And would be much more worthy of the interstate trip for the southerners too - its an awesome track. Noise restrictions will be tight though.

Well hopefully Russ you'll get something down in print because Im building a Silvia at the moment to suit this format.

Also seeing it's looking like we'll be able to use Lakeside again late in 2008 I reckon with its twisty/challenging track layout that it would be perfect for the Qld rounds of the this particular Time-Attack series and perhaps an challenge could then be setup between the states.

Kind of a State of Origin except only Russell gets sweaty and wears short shorts...

It could be nice to have an interstate invite series.

Qld- Lakeside

NSW- Wakefield

Vic- Winton

I reckon Calder Park could be an option for the Vic track, as the lap times are close to 1min, everyone can strive for that sub 60sec lap :) Although the layout of the track is a little boring. On the plus side, being a AASA track, it doesn't limit the event to being governed by CAMS if the decision was made.

Calder looks more like a HP track, and the Club circuit at Winton is also a 1min approx track and looks more interesting. Tighter and more challenging plus its also a AASA track, being used by the AMRS which is a AASA event.

But, thats just my opinion.

Well hopefully Russ you'll get something down in print because Im building a Silvia at the moment to suit this format.

Also seeing it's looking like we'll be able to use Lakeside again late in 2008 I reckon with its twisty/challenging track layout that it would be perfect for the Qld rounds of the this particular Time-Attack series and perhaps an challenge could then be setup between the states.

Kind of a State of Origin except only Russell gets sweaty and wears short shorts...

It could be nice to have an interstate invite series.

Qld- Lakeside

NSW- Wakefield

Vic- Winton

i like it! yeah tying to nut some stuff out early new year.

we will need to run some big mufflers for lakside. but that would be awsome, will be cool to see a super quick silvia, basically what ever you want but must run semi's and standard firewall position , no space frame

hmm thats about it

i like it! yeah tying to nut some stuff out early new year.

we will need to run some big mufflers for lakside. but that would be awsome, will be cool to see a super quick silvia, basically what ever you want but must run semi's and standard firewall position , no space frame

hmm thats about it

:domokun: Yes it'll be semi slick shod mate. Priced them local, what a rip. I'll be bringing mine in from Japan instead.

No space-frames, no firewall mods. Just regular engineering and goodies.

Brakes off my race car, that sort of thing.

Out of curiosity Russ, do you know why the M-Speed GTR only runs 265 wide tyres? Surely it'd get better grip with 285 or wider tyres? Most time attack cars Ive seen have only 265s such as the HKS Evo

yeah mate from what i understand they can"t get super soft qualify tyres in sizes bigger than that. some cars were running 245 40 17 so they could run ao48 super soft one lap wonders,

really hurt our chances over there not being able to do the same!! oh well next hopefully( we would never have won, but could have top six it with a 57 lap, the car definately had the pace)

can you let me know, what sort of money for some semi's?, bloody dear as poison here

Chuck the mufflers/cat. not exactly a massive performance gain. I ran my GTR with and without cat and main mufflers - made alot of difference to the noise, but couldn't feel any noticeable power gain

now this i am unsure about, i ran my car with just the front pipe and from the first little stab on the gas i could notice there was a big difference,

to note, my track day exhaust consists of a 3.5inch two high flow veilside mufflers and no meow.

so that in itself is rather flowing and very non restrictive but if i had a little time i would make a side pipe

Edited by Angus Smart
yeah mate from what i understand they can"t get super soft qualify tyres in sizes bigger than that. some cars were running 245 40 17 so they could run ao48 super soft one lap wonders,

really hurt our chances over there not being able to do the same!! oh well next hopefully( we would never have won, but could have top six it with a 57 lap, the car definately had the pace)

can you let me know, what sort of money for some semi's?, bloody dear as poison here

Russ, you're PM inbox is full mate

Want to PM me a different means of contact pls?

I just read that a 30year contract has been signed for Lakeside with a 10 year option. Lots of work to be done but it will be good to see racing there again even if it is controlled noise.

Paul, hook us up mate :)

Just get a street legal race going.

We need this street class for all those who dream of modding our street car up to race on the track while still keeping it legally registered on the street.

The problem is you can't even change the windscreen wiper blades (from OE) and be "legally registered". Non genuine mud flaps and you're illegal. For SEVS compliance the car has to have genuine OE brake pads. What's legal in Qld is not necessarily legal in Vic. My guess is every single car that turns up at these events would be illegal in some way/ways and would fail a roadworthy if the law was enforced 100%.

So where do you draw the line? That's the problem.

Let's try the shocks example (one I obviously know quite well)

1. Standard shocks, they would obviously be OK for Street Class. They would be mostly stuffed and hence quite dangerous for circuit work.

2. A used set set of Jap coil overs, are they OK for the Street Class? There are cheap, easy to get from heaps of import dismantlers.

3. Off the shelf Bilstein/Koni/KYB/Boge are they OK for the Street Class? Easy to buy, not expensive, replace the worn out standard stuff.

4. What about an SK modified set of Bilsteins, are they OK for the Street Class? A hundred and fifty or so sets sold, minor valving changes from #3

5. Same as #4 but with a coil over conversion. If #2 is OK then why shouldn't these be allowed for the Street Class?

6. A set of new Jap coil overs, same as in #2, just that they are brand new. Are they OK for the Street Class? They can cost up ot $4K for a set.

7. How about a set of quad adjustable, remote cannister Ohlins/Penskes/Proflex with Eibach springs, cost $12K or so. Are they OK for the Street Class?

And that's just shocks, what about ...........................

Cheers

Gary

street class,

bonnet free

front bumper free

all other body panels must be metal (no carbon doors etc allowed)

roll cage free

suspension must use standard pick-up points, but adjustable arms, aftermarket dampers etc are allowed

car must run ABS if fitted with ABS as standard

drivers seat is free

must have either standard passenger seat or an approved type (ie no home made alluminium 2kg seats)

brakes are free

engine must be same type as from the factory (intake, turbo, exhaust, ecu etc are free)

car must ran approved semi slick tyres (and maybe consider restricting size for each model like in CT and IP, only a bit more generous than their sizes)

maybe consider making it that car must have current road registration. but I'm not 100% sold on that.

street class,

bonnet free

front bumper free

all other body panels must be metal (no carbon doors etc allowed)

roll cage free

suspension must use standard pick-up points, but adjustable arms, aftermarket dampers etc are allowed

car must run ABS if fitted with ABS as standard

drivers seat is free

must have either standard passenger seat or an approved type (ie no home made alluminium 2kg seats)

brakes are free

engine must be same type as from the factory (intake, turbo, exhaust, ecu etc are free)

car must ran approved semi slick tyres (and maybe consider restricting size for each model like in CT and IP, only a bit more generous than their sizes)

maybe consider making it that car must have current road registration. but I'm not 100% sold on that.

The whole point of a street class is that its a street car, therefore registration is mandatory or its considered a race car.

It must therefore be able to be close enough to road legal to essentially pass a cursory police check (within reason)

Therefore having it sitting 50mm off the ground with no mufflers, lexan windows, drivers seat only and doors cut out to just a skin and no windows is not acceptable. The car would have to stand a chance of not being defected.

Its perfectly legal to have a car mod plated as a 2 seater, therefore 2 seats fitted would be the minimum and they'd also have to be seats that would stand a chance of not causing a defect, as mentioned prior. That is the only realistic means of governing it. If it doesnt meet these requirements, which are quite basic then it's race class.

Then among street class, and race class have a division of 2WD and AWD.

4 classes, easily governed requirements and less headaches for the people trying to run the days.

Remember that while you guys may want to make 1000 rules to ensure you can stop people trying to be faster then you, it all has to be governed on the day and if it gets too hard and political Russ and the other organisers may well just say its too mind-numbing and go back to living their own lives.

Having said all that, I don't care too much what happens in street class because I'm only interested in outright times :rofl:

Whilst the silvia is registered I'll only enter race classification.

In my opinion, NO.

There is no way on gods green earth that rollcage is legal for proper registration.

For one, its a weld in cage and secondly side intrusion bars must not be above the height of the sides of the seats.

If it wasn't for the cage, I probably wouldn't have too much of an issue with it.

You can google all sorts of cars and ask all sorts of silly things about different cars.

There should be one rule of thumb, and that is would it stand a chance of genuine registration within reason.

If you have $12,000 suspension in your car, that wouldn't technically prevent the car being able to get a roadworthy certificate. Though realistically, coilovers using spherical bearings are illegal as these generally do not carry ADR compliance for road use.

When you get pulled over, if the first thing you think of is "my car's going to be defected and/or confiscated" then you're probably in Race Class :rofl:

The whole point of a street class is that its a street car, therefore registration is mandatory or its considered a race car.

It must therefore be able to be close enough to road legal to essentially pass a cursory police check (within reason)

Therefore having it sitting 50mm off the ground with no mufflers, lexan windows, drivers seat only and doors cut out to just a skin and no windows is not acceptable. The car would have to stand a chance of not being defected.

Its perfectly legal to have a car mod plated as a 2 seater, therefore 2 seats fitted would be the minimum and they'd also have to be seats that would stand a chance of not causing a defect, as mentioned prior. That is the only realistic means of governing it. If it doesnt meet these requirements, which are quite basic then it's race class.

Then among street class, and race class have a division of 2WD and AWD.

4 classes, easily governed requirements and less headaches for the people trying to run the days.

Remember that while you guys may want to make 1000 rules to ensure you can stop people trying to be faster then you, it all has to be governed on the day and if it gets too hard and political Russ and the other organisers may well just say its too mind-numbing and go back to living their own lives.

Having said all that, I don't care too much what happens in street class because I'm only interested in outright times :D

Whilst the silvia is registered I'll only enter race classification.

yeah agree. add no window replacement to street class, and must retain standard door trims. so yes let's make it current rego required.

also agree within the two classes you need RWD and AWD.

and personally I'm not too hung up either. Don't think I will be giving anyone a fright either in street class or outright. :rofl: lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
×
×
  • Create New...