Jump to content
SAU Community

Recommended Posts

  • Replies 812
  • Created
  • Last Reply

Top Posters In This Topic

I was thinking (which is dangerous)

Have you had a chance to weigh the front and rear seperatly of a R32 gtst to compare it to your ls1 powered jobbie...would be interesting to see how far the weight has gone rearward with the lighter motor but heavier box, GTR diff etc

we know that complete ls2 weighs 90kg, we weighd rb25de today and it maxed out the scales so 120kg+

I was thinking (which is dangerous)

Have you had a chance to weigh the front and rear seperatly of a R32 gtst to compare it to your ls1 powered jobbie...would be interesting to see how far the weight has gone rearward with the lighter motor but heavier box, GTR diff etc

SO Judging from what I remeber the weight balence is standard. you should be very damn close to 50:50 front to rear.

I cant believe how light the Ls1's are 30+ kgs lighter than an RB25de is quite suprising so that would prob be more like 50+ kgs over a DET once you include The IC + Piping etc and not to metion all that hangs right at the front of the car.

yeh it is at least 30kg as that was the max the scale would read, and it was short steer pump and exhaust manifold.

weighed r33 tubo box today and it went 57.5kg. i was very surprised as i thought it would be lighteras thats only 5kg lighter than the tremec 6 speed.

so i think i am up somewhere between 35-55 kilos in the driveline which i am very happy with.

basically this means that the car should be easier to make handle and my power to weight is up.

1000kg and 400hp is looking good.

SO Judging from what I remeber the weight balence is standard. you should be very damn close to 50:50 front to rear.

I cant believe how light the Ls1's are 30+ kgs lighter than an RB25de is quite suprising so that would prob be more like 50+ kgs over a DET once you include The IC + Piping etc and not to metion all that hangs right at the front of the car.

ok, just read the whole thread..(phew!)...nicely done indeedy...now.. if someone wants a 31 or 30 to put a v8 in..call me...anytime :O

interesting on the weight differences, who'd have thunk it eh?!!!

cant wait to see full pics and vid!!!

Not too much to report, recieved coil-overs from Gary last week. just waiting for the lower arms and bars and bush kits now which should have by friday so with a bit of luck i might have the car back on the ground on saturday arvo. Also close to purchasing front brake kit, so car will be pretty much a roller again. That will just leave engine completion, which i have all the parts for, wiring & exhaust. some fiddly bits to do also like tin-work and ducting. catch-cans etc..........neverending.

post-20078-1223934315_thumb.jpg

post-20078-1223934444_thumb.jpg

post-20078-1223934542_thumb.jpg

yeh, eye on the prize. keep putting myself behind the 8 ball though, finish one thing then find something else to buy. looking seriously at that intake again, tuner reckons there is free horespower to be had with being able to adjust runner lengths so it looks like it will be happening next. Also going to give the E85 a go as all the race meetings are sprints so consumption wont be an issue. Doing endurance events might mean 2 extra fuel stops.

Keep the end in mind Stu!

I might come past this week to talk the sphincter of the universe about servicing the golf........will let you know

i have no doubt there is more power to be made on E85, cooler intake temps coupled with higher octane levels allowing more agressive tuning, its the consumption that is the concern as i only have a 50liter tank. but if its OK for V8SC, im sure ill be fine.

e85 is a great idea....we might give that a shot too. we've got a drain valve on the fuel cell, and datalogit to switch the tunes easily....will be good to see how it compares

lol. that is pretty cool. finally get that decent engine into a decent chassis. :P I like it.

can't wait to see your thing rumbleing along stu. it will definitely rock.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...