Jump to content
SAU Community

Recommended Posts

i have been in contact with Mu Secret based in Sydney in regards to a few of their items which i thought you guys might be really interested in. they were quiet helpful and were thinking of starting a trader account, but my approadch to them just gave them another reason to see their potential before making a final decision regarding joining the crew as a trader:D Offer is starting as of TODAY Saturday October 6th, and will go on for 2 weeks until October 20th!

if i can get 3 orders for each of the following can get at the prices as listed:

Tial-style Wastegate 44mm, purple coloured- $300rrp, $220 GB

wastegate1.jpg

wastegate2.jpg

Tial-style blow off valve, includes weld-on flange. colours are chromed, black, red, blue- $125rrp, $100 GB

bov1.jpg

bov3.jpg

bov2.jpg

Wheel nuts, similar style to RAYS, VERY lightweight open ended, can get 1.25 and 1.5 thread, colours are black, red, and blue. $100rrp, $80 GB

nuts1.jpg

HID lights, can get in any heat range between 3000-12000k, available for any car, low beam only $350rrp, $250 INTRODUCTORY PRICE! *edited* spoken to andrew from Mu Secret, this is now an introductory price until end of GB so doesn't matter how many orders i put through to them:D

HID2.jpg

HID1.jpg

Goods can be collected from the Mu Secret store located 15mins from Sydney CBD (Concorde/Burwood), otherwise freight can be organised which cost is dependant upon location and weight of goods purchased.

please let me know if you need more pics as ive got some on my camera!

Dom

Edited by bloodsword27
Link to comment
https://www.sau.com.au/forums/topic/188136-hids-wheel-nuts-bovs-and-wastegates/
Share on other sites

HID's are now available as we Introductory price before they plan to become official traders! get em while they're hot! pic of the difference on my car during the day of normal bulbs and a 8000k kit...very happy with it :P

HIDs.jpg

1st post updated with some pics!:/ let me know if an help with anything else as well!

Edited by bloodsword27

sorry guys should have made that more clear. it is with 20 nuts only, open ended, no lock ones

have had a few orders for the locknuts already so they're good to go for that price :(

sorry guys should have made that more clear. it is with 20 nuts only, open ended, no lock ones

have had a few orders for the locknuts already so they're good to go for that price :)

Can you get locknuts?

I'm after aluminium rays / buddy club lock nuts in black.

What am I looking at pricewise?

Cheers mate.

Can you get locknuts?

I'm after aluminium rays / buddy club lock nuts in black.

What am I looking at pricewise?

Cheers mate.

so ur after the actual locking ones or the normal wheel nuts (hex type)? RAYS short type closed end is $220, long nuts are $280 a set in black, blue and red....can source up the buddy club ones if that's wat u were after....

dude, this has just turned into you taking orders and selling stuff, ie not a group buy. If Mu's secret want to become a trader tell them to contact me and I will happily sort it out for them.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...