Jump to content
SAU Community

Recommended Posts

Hey,

Just got my hands on a 93 GT-R. When I got it, it didn't come with a remote for the Central Locking and the Alaram, and I was wondering where i'd go to get a remote?

Or would it be better to get an after market alarm system fitted?

-Michael-

Link to comment
https://www.sau.com.au/forums/topic/189310-factory-remote-for-r32-gtr/
Share on other sites

I've never seen a 32 GTR with a factory alarm or remote central locking. are you sure it's original>

I'm pretty sure, all the places I look have remote central locking is listed under stardard equipment, plus a mate from school has a 92 R32 GT-R and he recons his alarm is standard or factory.

-Michael-

I'm pretty sure, all the places I look have remote central locking is listed under stardard equipment, plus a mate from school has a 92 R32 GT-R and he recons his alarm is standard or factory.

-Michael-

I don't like you ;) I had a 1978 Honda Prelude in school... that was 3 years ago...

I don't think its standard man... I don't even think you have central locking... Take it to an alarm dude and either get it sorted out, or get a new one...

And i mean like... NOW! If you are in Aus (assuming) then go to the state forum you are in, checked the first few pages... they will be riddled with ZOMG SKYLINE STOLED! type threads... and it's always those that just bought it, and haven't had a chance to put an alrm in it yet... BIG MISTAKE... also, insure it if it's not...

PS: I don't really not like you :P What state are you in?

I'm pretty sure, all the places I look have remote central locking is listed under stardard equipment, plus a mate from school has a 92 R32 GT-R and he recons his alarm is standard or factory.

-Michael-

yeah they have central locking in that if you open the drivers lock the passengers will unlock too, but it's not remote central lockingm, and it only works one way. I've owned 3 R32s and none of them have remote central locking or factory alarms. neither have the 2 R33 GTRs i've owned. add to that the dozens of GTRs I've driven and/or been in over the years and one of them have had it either. either I'm right, or you two both have very rare 32 GTRs.

yeah they have central locking in that if you open the drivers lock the passengers will unlock too, but it's not remote central lockingm, and it only works one way. I've owned 3 R32s and none of them have remote central locking or factory alarms. neither have the 2 R33 GTRs i've owned. add to that the dozens of GTRs I've driven and/or been in over the years and one of them have had it either. either I'm right, or you two both have very rare 32 GTRs.

Thanks Guys,

I'll take her out and get an alarm fitted on the weekend. Oh, do the 32's come with a factory imoblizer? Coz mine has one fitted when I got her.

-Michael-

yeah they got the gayest possible remote central locking systems (meh early 1990's tech) as factory options... no immobiliser though.

as standard R32's don't even have door lock solenoids on the driver side, only the passenger side, so you have to install one along with the alarm to get all the doors to lock.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...