Jump to content
SAU Community

Recommended Posts

yea around sunnybank and city area

im at sunny bank market square all the time

my g/f is Chinese so we shop there a lot

all the Asian dudes in skylines look at me like they wanna stab me lol :D

if you see a blue 32 gtr with an "option 2" sticker above the exhaust come say hi

Spotted a white R33 coming out of maccas in Sunnybank bit after 6 this evening.

Saw a blue R32 drop into the Kumho Tyres warehouse in Coopers Plains yesterday.. had GTR Rear wheels and a Elite Racing Developments Sticker on the rear quarter window. I was getting lunch from the takeaway when I heard the RB coming around the corner :D

I saw 2 r35's in 2 days!!!

One at Mt. Tambourine the other day, license plate MDA, saw it twice at two separate times, then Wednesday driving through Caloundra, on Park place! Seen more r35's than jza80 Supras these last 2 days!! ( i use a80 supra coz its my fav car!)

other than that seen heaps of skylines driving round, but i leave tomorrow bak for perth!!

There is a R35 that lives up here on the Sunny Coast and it is absolutely awesome.

I love seeing it around soo nice!

Saw it at Mooloolaba the other day.

Also, this morning, saw a p-plate supra fly up Alexandra PDE. Awesome car.

I have been on hols in mooloolaba for the last week, gtr r35 plates.

there is another guy with a super silver at maroochydore who is on this forum with standard maroon qld plates

say hello

Edited by handbrake

Spotted a yellow R34 GTR parked outside the Morayfield Kmart tyre and auto on thursday..... scares me seeing a gtr with the front wheels hard against the curb and the bumper and lip pushed all the way up the curb :)

anyone on here

I have been on hols in mooloolaba for the last week, gtr r35 plates.

there is another guy with a super silver at maroochydore who is on this forum with standard maroon qld plates

say hello

I saw your car last weekend parked near just up from underwater world.

Awesome car. Plates are awesome!

Spotted an R33, two-tone white on gunmetal, on Lutwyche Rd this morning. I didn't get a good look because it was peak hour, but it had stock R33 GTR wheels and an SCC08 sticker. Couldn't wave sorry mate, was between gears and the traffic was stop-start, but managed to give you a nod, not sure if you saw.

I was in the red 33 heading towards the city :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...