Jump to content
SAU Community

Recommended Posts

Hi All,

Just had my highflow r34 turbo blow up and dont want another one so im in the market for a new turbo setup. I've looked at peoples results with the 2530 but want something with more punch and top end.

My car is primarily used for drifting and I already have all the supporting mods.

Who has TD06 kits on their rb20s and which types?

is the 20g kit too laggy? Worth the price tag? Any other turbo suggestions?

Thanks Guys,

Stuart

Link to comment
https://www.sau.com.au/forums/topic/194267-td06-kits-on-rb20/
Share on other sites

L2-20G is the go on rb20 for drift and time attack, be aware we have sold around 6 kits over the last 3months so expect to see a fair few on the circuit next year :D

i will post up some dyno graphs for you.

L2-20G is the go on rb20 for drift, be aware we have sold around 6 kits over the last 3months so expect to see a fair ew on the circuit next year :O

As Trent said look at the L2-20G Stu, you wont regret it, only have to look through the Top RB20 thread and see peeps like Troy and Adam and the results.

My car will be running soon so your welcome to drive that to gauge the amount of lag with a similar set up that you would be looking at :D

WIll a TD06-25g be good for an RB25?

Looking at around 300rwkw or would it be best to go the TD07?

td07 is a old T78.... to big, you will see high 400's with a T78. Td06-25g will make 300 depending on housing size. Have a look in the exhaust housing inlet for a number there will be a number between 8-16... this is the exh size in cm2. personally i would use a T67 10cm as i get 280rwkw out of the 8cm T67 on a Rb25 and it makes .7bar as early as 3000rpm!!!! fkn responsive with strong top end.

L2-20G is the go on rb20 for drift and time attack, be aware we have sold around 6 kits over the last 3months so expect to see a fair few on the circuit next year :O

i will post up some dyno graphs for you.

Thanks for that Trent, some graphs would be good! what is rrp on the L2?

I'm not running aftermarket cams or cam gears at this stage...and was told the TD06S-20 might be more suited? thoughts?

As Trent said look at the L2-20G Stu, you wont regret it, only have to look through the Top RB20 thread and see peeps like Troy and Adam and the results.

My car will be running soon so your welcome to drive that to gauge the amount of lag with a similar set up that you would be looking at :D

Thanks Ben, give me a shout when you've got it on the road!

I may look for something else then.

Im after 260 - 280rwkw with this round of mods but end goal is 340 - 360rwkw

I dont want to upgrade turbo again with the next round of mods

Do a search for Bu5ter. He used to run a TD06SH-25G for 330rwkws odd. Made very strong power and car ran 11s.

As for the 20G and RB20. Can someone explain to me the difference with the L2S? My thoughts are the 20G is just about right for the RB20, just bolt it all up and go.

If its true that there are going to be a few more at the tracks next year then i may again get motivated. Its no fun when there isnt anyone out there to play with, and i cant get within cooee of the GTR guys :D

^^ yeah the TD06SH-25g is differrent than the TD06-25g but, the SH will go 10's on slicks (MSA/CREATD 5spd) and 11's on radials as youve posted here is a kit CREATD used on thier workshop car.. just shy of 300rwkw at 1.0bar from memory

http://www.creatdmotorsports.com.au/galler...hp?g2_itemId=34

I may look for something else then.

Im after 260 - 280rwkw with this round of mods but end goal is 340 - 360rwkw

I dont want to upgrade turbo again with the next round of mods

this is two totally different behaving turbos a 360rwkw rb20 is going to be useless to drift as its going to be laggy as all shite and run big boost, 260-280rwkw is easy with a L2 but 300rwkw is a pipe dream. T67 will get 340rwkw but need boost and rpm to do it, all enemys of dorri.

you need to decide drift or dyno queen as the two NEVER work together. regardless of turbo brand or people promise.

ok back to my poor little rb20 snotter now :D I want to see peoples results

LOL...if you do a search there are a few around. I only say that as ppl are probably sick to death of me posting my dyno sheet :O

gallery_462_50_59282.jpg

Completely Std RB20, cam gears, Power Fc and GTR injectors with Z32 AFM annd complete Greddy TD06-20G setup using an 8cm rear housing. I previously made 234rwkws with this setup. Having another look at the tune netted me the extra 26rwkws, just by removing what i guess was soem of the fat from the tune. Thats not to say the tune is now a grenade, as i have done soem track days and a 3 day motorskhana/track event in it where the car had to endure me anda co-driver....so the tune is still very reliable

LOL...if you do a search there are a few around. I only say that as ppl are probably sick to death of me posting my dyno sheet :O

gallery_462_50_59282.jpg

Completely Std RB20, cam gears, Power Fc and GTR injectors with Z32 AFM annd complete Greddy TD06-20G setup using an 8cm rear housing

That curve is really quite good! I thought it would be way more laggy! I would have the exact same mods minus cam gears as well. If I start a 2 minute noodle diet right now I could probably afford one for christmas. :D

URAS :D

doh :P rb20 thread with a rb25 infiltrator... f**ked with my head.

T67 10cm or 12cm td06-25g still wont cut it 300rwkw ish maxed, if it is actually a sh-25g 330rwkw is ok.

Below is a R32 RB20 dyno graph. 1.2bar on std rb20 231 corrected rwkw (engine kw is the scale on the graph with more boost) pay no attention to the shape as their scales make it look laggy when actually its really not (the L2 and 06S are very much the same only the L2 is more effecient at higher boost up top.... less roll off). i have also attached a dyno graph of the TD06s-20g on a RB20 you can see it mirrors roys setup only as it runs less boost it only makes 248.8kw

another option is a HKS 2835 56t with 0.61 housing, this works extremely well and i have used these in SR and RB config. (james vahoumis bought my SR HKS 2835 kit and used it in his championship winning s14.5) both Bai and the other D1 drivers prefferred the L2 (like myself) over it though. i also spent alot of time in james cefiro with the HKS 2535 and it was killer street/hills drift but is just too small for serious track drift, 2530's just too damn small.

post-34927-1195449903_thumb.jpg

post-34927-1195450691_thumb.jpg

Tazz - there is a massive thread on it all.

Results, turbos and all the bells and whistles from various users.

If you dont read this thread:

http://www.skylinesaustralia.com/forums/To...60r-t58229.html

Your doing yourself great harm :P

Thanks for the info guys, much appreciated....

I've been fed a few more options from people...so who has used the 3071R on a 20? It looks like a cheaper option...but would it be too laggy even with the smaller exhaust housing? or worth spending the extra money for the L2 kit and be done with it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...