Jump to content
SAU Community

Recommended Posts

Ryan in the red R33 hear, just to set the record straight troy and damo are the most pussiest skyline drivers i have ever seen. Both are too scared 2 push there cars to the limit both are crap drivers nether can put there cars sideways without spinning out of control. When you's boys are ready to play Ill be Drifting more sideways and racing harder and faster they both of you put 2gether. RED R33 DRIFTGOAT...

BARR... BARR... BARR...

GTS Skyline TopSpeed Record Holder 272@7340RPM

dude give a ****

1 day your gonna be wrapped around a tree

its u guys that give jap import drivers a bad name

every1 says it

all the cops know you

i dont give if i drive like a *****

i got the car cause i like the car

i didnt get it to have an ego and to drive it like an idiot

u sound more like a commodore driver

haah

made us piss

i know u would of but we did the LEGAL LIMIT

and how do i seem full of shit ? :D

also good sound system to me is better than havin a big turbo :(

for now anyway

u know another thing that happened

gave ryan in his red r33 a drag down ewans road

it was a dead even heat to the end

i thought i was gonna get owned

;)

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...