Jump to content
SAU Community

Turbos

bjpeters

By bjpeters,
in General Automotive Discussion

 Share

Recommended Posts

bjpeters Rookie

bjpeters

Posted
Posted

hi everyone, just a newbe question. i am looking into buy a turbo skyline but im not sure if it is going to be worth the hassle of having a turbo. i hear they need to be rebuilt every 60,000 kms costing 2grand, aren't good and overheat on long trips (which i frequently do) and if they do blow up the stuff the whole engine! are these things true? has any 1 had major issues with their turbos, or is a matter if you look after it right everyting will be good? what is a good amount of kms to buy a 2nd hand gts-t?

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/
Share on other sites
FULOCK Collaborator

FULOCK

Posted
Posted
hi everyone, just a newbe question. i am looking into buy a turbo skyline but im not sure if it is going to be worth the hassle of having a turbo. i hear they need to be rebuilt every 60,000 kms costing 2grand, aren't good and overheat on long trips (which i frequently do) and if they do blow up the stuff the whole engine! are these things true? has any 1 had major issues with their turbos, or is a matter if you look after it right everyting will be good? what is a good amount of kms to buy a 2nd hand gts-t?

Mate!! all these people telling you turbo's overheat, and blowup and arent reliable etc. dont know how to treat a car!!!

My R31 skyline was a bolt on turbo setup with nice size cooler, 10psi making 165rwkw, I tuned it backin 2003 I think and it did not miss a beat for a good 5 years untill I sold it!!!!

I drove that car in 40 degree heat with a full car load goin for cruises, to the beach etc. 40 mins drives at a time.

- it did not overheat!

- it did not blow up

- it was very relible!!

do your service every 5000k's, make sure your cooling system is working correctly and you shouldn't have any problems at all....

If you do donuts for 10 or so mins straight..... any engine will overheat!!!!

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527539
Share on other sites
grandmasterb Grand Master

grandmasterb

Posted
Posted
hi everyone, just a newbe question. i am looking into buy a turbo skyline but im not sure if it is going to be worth the hassle of having a turbo. i hear they need to be rebuilt every 60,000 kms costing 2grand, aren't good and overheat on long trips (which i frequently do) and if they do blow up the stuff the whole engine! are these things true? has any 1 had major issues with their turbos, or is a matter if you look after it right everyting will be good? what is a good amount of kms to buy a 2nd hand gts-t?

:bunny: with friends like these who needs enemies...

Best piece of advice anyone can give you is dont rush into buying the first car you see, get it checked out and spend sometime looking at EVERYTHING for yourself. If you are in over your head then get the help from a professional (mechanic or friend) and be prepared to spend a little money doing so.

My 2cents is id rather spend $100-200 on a car to find any minor/major problems first than take a punt and having it end up costing you $$$$$$$$$

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527579
Share on other sites
GTR-32U Mentor

GTR-32U

Posted
Posted

when I bought my Skyline I knew the HKS turbo was on its way out so I got it a little cheaper.However that turbo lasted almost 2 yrs before the telltale waft of smoke while sitting at the lights.I had it fully rebuilt for just under a grand..ran beautiful...Just make sure oil changes are regular and you will have years of trouble free motoring.Dont believe all that crap that you have been told

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527615
Share on other sites
joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

My 33gtst has just ticked over the 100000 (and the rest :bunny: ) and is still on the stock turbo which has had 10 pounds of hard abuse shoved down her throat for 4 years. And i still havent blown... Wait, am i still even talking bout cars here?

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527675
Share on other sites
HackerX Community Regular

HackerX

Posted
Posted

My R34 GTT has:

Done the trip from Brisbane to Sydney in a day. No issues. Just spent a minute longer cooling down the engine before switching it off.

Plenty of >3hour trips.

Does 2 >1hour trips on a daily basis. Hasn't missed a beat.

Use decent oils and regular maintenance and these cars will out last most cars on the road.

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527847
Share on other sites
Simmo1985 Community Regular

Simmo1985

Posted
Posted

Skyline's aren't a cheap car to run by any means.. Maintenance, insurance and running costs are all higher than normal every day cars. If cheap motoring is what you're after look elsewhere. Having said that, Skyline's will be reliable if you look after them as said previously.

The stuff that you've posted is an absolute load of crap. Maybe that sort of stuff is true if you are using your car for drags / track / drift events twice a week, lol.

Over-heating on long trips lol..

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527928
Share on other sites
writeoff Mentor

writeoff

Posted
Posted

One thing people haven't mentioned here is that boost levels can effect the lifespan of the turbo. Standard ceramic wheeled GTR turbos (non R34 N1) shouldn't be boosted above 15psi or 1 Bar (although there are plenty of people who have and haven't had any problems... yet). I don't know about GTS-T turbos but I imagine they have a common boost break point as well.

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3528647
Share on other sites
dmr Mentor

dmr

Posted
Posted (edited)
Use decent oils and regular maintenance and these cars will out last most cars on the road.

i agree with this wholly. skylines are made to cop a belting and will ask for more. you just have to keep high maintenance.

make sure you keep everything under/at it's limits and the car with run fine under most if not all conditions and situations..

eg: if you've got a stock fuel system and bolt on a huge turbo without a tune, you will come across problems eventually. you have to mod everything in consideration. if you go for a long drive you should make sure your turbo cools down before switching the car off. this site is a huge resource for that sort of stuff!

as DRD-00F said, GTS-t's are safe at 12psi. make sure you have an aftermarket boost guage to monitor this.

hope that helps! :D

Edited by dmr
Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3528773
Share on other sites
Gazzilla Experienced

Gazzilla

Posted
Posted
My 33gtst has just ticked over the 100000 (and the rest :( ) and is still on the stock turbo which has had 10 pounds of hard abuse shoved down her throat for 4 years. And i still havent blown... Wait, am i still even talking bout cars here?

hahaha... hamish u crack me up!

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3529025
Share on other sites
zebra Grand Master

zebra

Posted
Posted
I see what's happened here..

Your mates have obviously confused the word TURBO with the word ROTARY.

I beg to Differ.

My old Series 3 Rx7 had 230,000ks on the original motor....never missed a beat.

Even drove it from Melb to the Gold Coast In December and Ran beatifully :)

Look after any car and you wont have any worries with it.

Preventative mantinence. Making sure nothing can go wrong is a lot easier than fixing somthing when it does.

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3543681
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • uchoa
      Yet another RB Neo misfiring thread after reading all the others.

      By uchoa · Posted

      Good tips, will get on those tomorrow. When doing the maintenance I did move a few of those connectors around, and things that are old tend to not like moving around. (Like me).
    • GTSBoy
      Yet another RB Neo misfiring thread after reading all the others.

      By GTSBoy · Posted

      Don't try it. It will be shit. Better chance of damaging the engine than gaining any knowledge about the old one. Maybe, but unlikely, especially if the O2 sensor is working. You can use NissDataScan to look at the stock ECU.   Cleaning the AFM is seldom necessary and seldom helps. The R35 coil & loom conversion should eliminate dud coils or plugs. But as you still have misses - look to the plug where the coil loom connects to the engine loom, and the CAS plug. Need quality connections there. Also look to injector plugs. And the AFM plug while you're at it. Also look to whether your injectors are clean and flowing evenly. Get them out and onto a testbench.
    • uchoa
      Howdy from the states.

      By uchoa · Posted

      Good to know, I feel like I am in for a rollercoaster ride that looks like a sine wave. 
    • GTSBoy
      Howdy from the states.

      By GTSBoy · Posted

      You'll fit right in. Acceptance is the first step.
    • uchoa
      Yet another RB Neo misfiring thread after reading all the others.

      By uchoa · Posted

      Hey folks. I've been lurking and browsing the forum for a while, since I got into my head that I wanted a skyline. Having purchased an overpriced completely stock GTT, (only "mods" it has is HKS pod filter and catback) now that it became legal in the US, it was all glorious and sututu noises here and there. But then I wanted to do things right and went to do basic maintenance. After all the fluids, filters done, I did the spark plugs, that's when the problems started.. First the car started spluttering at around 4.5k RPM. Which I gapped down the new plugs and that solved the sputter there, but the car now always misfires at idle with pops when lifting off and shifting 2nd to 3rd. Similar to the issues in this recent thread. I've been banging my head against the wall, reading the threads here and trying suggestions for a couple months now, so decided to start this one to explain exactly what I tried and what is going on. The symptoms of the issue: Idle and low revs misfiring intermittently. You can hear the exhaust tone change and the shakes on the shifter knob. It happens frequently, but doesn't seem to have a rhythm to it. Pops when backing off throttle. It pops and or burbles almost feels like it spits fire when it pops. (Happens mostly in 3rd gear at around 2k RPM). When under load and after 6k RPM, it also pops when shifting from 2nd to 3rd. There's a ticking noise at around 2k RPM in 2nd gear going downhill, seems unrelated though but I am out of educated and downright dumb guesses. Not noticeable lack of power when putting the car into load. The attempted diagnosis and solutions: Unplugging coils when the car is running This did nothing to change the idling and tone shift for every cylinder. Checking the exhaust headers with thermometer They all are within what I'd say it is margin of error of the laser thermometer New spark plugs Tossed two new sets, copper, iridium and using the old ones, still misfiring, even re gapped to 0.8mm, still same thing. MAF cleaned with the "specific" spray cleaner No changes in the issues what so ever. Brand new loom and r35 coil conversion (was going to add the r35 coils anyway) car runs arguably better, still misfires, but seems like does less frequently. Placebo? Code 21 now being thrown, thanks nissan gods. Removed the CAS to check the shaft for play or anything. CAS seems all fine, nothing that indicates any issue, visually speaking. Things to attempted next: Ordered a new MAF (chinesium from Amazon, to be able to return regardless of result). Fuel with proper gas, maybe it is this California water that they sell as gas that is to blame? Plugin the link ECU and check the info using the built in base map. Go back to BMW and eat my rob bearing breakfast without milky oil mixture.   Do any of you have experienced anything like this or have any suggestion?
×
×
  • Create New...