Jump to content
SAU Community

Recommended Posts

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

nope the only legal turbo is the one nissan put on there from the factory. can't even be a turbo with the same size wheels, it has to be the factory turbo. not to say there may not be people running illegal turbs of course

Its a petty no body checks the Vspec for ceramic wheels. It's a bit of a joke that CAMs develops such lengthy rules then no body really enforces them and "some" orgainisers choose to look the other way with respect to "some" cars.

very true brian. I chose not to take a chance on anything because it was a long walk home if I got caught.....but only saftey was checked not eligibility (except for "rear wing-gate" and that was a bit of a farce)

3x 32 gtrs parked in a row first night. Scruitineer came over and told Mark and I our (standard) rear wings were illegal as the other car had the correct "n1 rear wing"

about 2 hours later they finally contacted the driver of the other car who admitted his was aftermarket :thumbsup:

hmmm let me guess, the other GTR was the white one with the R33 wing?

The scruteneers were easy as on us. They were looking round the car and I said

"this is Steve Glenny's old car, and it was Warrick Freemantles before that"

"ahhh this is Warricks old car, it'll be fine"

they did a quick look under the bonnet ticked the boxes and left.

:thumbsup:

same check on our car, safety was checked properly like at a race meet (and glad they do). the pre targa check done at SAS automotive was more thorough but of course people could change things after that check easily. and I'm not sure that all cars go through that?

considering the number of gtrs the scruitineers should have a slightly better idea of things to check, eg injectors, afm, exhaust size and turbo external markings would be quick and catch 80% of things that matter. turbo of course is tricky considering what you can do with high flow standard units (better than the n1s for a 32 I think)

well i might still run the tein's but have them changed by Stu to suit Tarmac. would love to put a set of DMS or Ohlin's under it but can't find any second hand ones for sale. im pretty sure it all has to be stock in my catigory. can anybody clarify that? it's a R33 Gts-t.

How would they check for standards that have been highflowed apart from removing the turbo's?

I was reading in a rally magazine that Cams can put apart your turbo/s and measure them. Im trying to find the picture i had of the special tie's that FIA used to prevent Turbos from being internally modified. it's almost like a smaller version of a cable tie wit ha serial number stamped on it.

Hi Ben

It's doubtful that I will run, time and other priorities.

Besides I couldn't break my cycle 99,01,03,05,07!

I think finally some competitors ideas are getting through and the new course would be great, just a pity it's not overnighting in Burnie.

Goodness knows how everyone will get a bed on the West Coast particularly with the mining boom and the tourists. Better book soon.

Yeah sflamin mongrelineering can be real interesting.

I am still trying to figure out why my 3rd placed GTR got so much attention at the finish of last years Targa when a certain second palce GTR didn't get a look at at all. I guess it's who you know. Even SB played scrutineer and decided to check my car out under the bonnet with his mobile phone!

I was told that he was doing a comparison but where is the sense in looking at Tony's R32 and my R33 and not looking at my R33 and the second place R33 as I suggetsed to them at the time, but they did not want to do that.

Then when I came back down from the ceremony the "real" scrutineers where at it and every orifice was opened up again.

Welll all that was said at the end of it was that the door linings needed to have fluffy stuff stuck to them for the new rules so in one way it was good to show that the car is legit as some people feel thay have to tell everyone it's not.

Certainly there is a lot that could be checked on the cars. Instead of the minor stuff why not go for the real mods that have a major affect on performance. You can't tell me cars with 18' and 19" wheels are running std diff ratios. GTRs are overgeared to start with.

Oh look now youve got me started again, better shut up or I'll upset some one.

Are you guys going to do Rally Tas?

I think this and rally of Burnie will really take off now LWR has hold of it.

Have you got your car fixed up Duncan, that was sad in Fernglade last year. If your gunna do it again let me know so can go and watch!

To everyone that has a go good luck, if you need help up Burine way let me know and I'll see what I can do.

Cheers Brian.

I was reading in a rally magazine that Cams can put apart your turbo/s and measure them. Im trying to find the picture i had of the special tie's that FIA used to prevent Turbos from being internally modified. it's almost like a smaller version of a cable tie wit ha serial number stamped on it.

this is what we do with engines in production cars. they get measured up by an independant builder and then the head and sump are sealed. If you take either off it has to be measured and sealed again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...