Jump to content
SAU Community

Recommended Posts

Hi Guys

after getting a custom made plenum and putting on a xf throttle body, i have problems with having my accerator fitting properly.

If there is a possibility there is a smaller washer bottle from another car (one with two motors for front and rear) that fits in the same position as the standard one ( about half the size) everything will plan out very nicely.

Also

i have a turbosmart BOV and Turbosmart progate 48mm wastegate, and a AVC-R

read all the books, still confused, just installed a custom made high mount exhaust manifold. Can anyone explain ( preferably by diagram) how to hook up

all the vacuum lines from wastegate to AVC-R and BOV.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/199115-smaller-washer-bottles-r33-rb25det/
Share on other sites

Didn't you say in an earlier post that the R31 cable works and fits?

Anyway... I've temporarily shortened my R31 cable by cutting the eyelet off at the end, pulling the black outer sheath off, cutting that and rejoining using some fuel line and areldite. I then sourced a new eyelet from a motorbike shop and re-fitted that at the suitable length.

Long term plan is to get a custom one made up, or possibly try the S13/180x cable... Thats if anyone ever decides to reply to their pm's on NS.com.... :banana:

Washer bottle... Not sure, but also need one for mine... I'll prob go a GReddy one, or one of the fancy ones available from yahoo japan

yeah i did say earlier that the r31 cable works, but its resting slightly up against my washer bottle which i am trying to get it away from.

i just dont want it to get jammed on the washer bottle.

Where can i get one of theses greddy washer bottles from?

im pretty sure alot of businesses could source them for me but who has them ready to purchase?

greddy washer came in my mspec kit.. hopefully you dont have to buy the whole kit though. alternatively i dont think it would be hard to make one. get another coolant reservoir and drill two holes in it and reuse the rubbers

greddy does a wicked one, i bougt in about 12 just before i left autobarn HO they are small and cheap and allow twin washers.

if u call $80 for a peice of plastic that holds water cheap............

go to ur local super cheap buy a universal bottle washer for $18

does the same shit

if u call $80 for a peice of plastic that holds water cheap............

go to ur local super cheap buy a universal bottle washer for $18

does the same shit

should be more than half that! i paid 1/3rd that

looks like the only place to buy them seperate is nengun, which takes 20 days.

Autobarn - i rang and they dont even have that part number on there system and cant get it apperantly.

ISC performance - can only buy it if you purchase the intercooler kit. The supplier will not seperate.

Is there any other options i can do, or any other water bottles that are smaller than standard that will fit with little adjusting.

Autobarn - i rang and they dont even have that part number on there system and cant get it apperantly.

Trust me they are there i (up until i resigned on the 21st) ran TRUST and BLITZ ect and all the performance parts at autobarn HO i bought in 12 and sold two that leaves 10 more in stock 100% guranteed.

vacuum lines i have all sorted nismo 31

i did alot of reading, and i dont think the setup i had before was correct haha, could of been the reason it was playing funny buggers.

I ended up ringing autobarn slacks creek and the chick there said she has 4 in the warehouse, so im getting somewhere. should have it next week.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...