Jump to content
SAU Community

Recommended Posts

Hey guys,

After purchasing my GTST I took it down country way and got about 400kms out of a tank, which is a 2/3rds of what I'd get out of the Suby, but it's a 6 so I spose that's acceptable??? Well after the country trip I re-filled and it looks like I'm going to get about 200kms out of tank for city driving!!!!! Is this normal guys??? I haven't been givin it heaps either, just casual city driving....

I was thinking of fitting a fuel pressure regulator, is this the fix for it????

Any help would be great.

Cheers,

Kyran.

Link to comment
https://www.sau.com.au/forums/topic/19996-fuel-consumption-what-the/
Share on other sites

Nope, that's not normal.

I get around 440km to the tank (when the fuel light comes on) with city driving.

I'd check the O2 sensor. Sometimes the Jap's love to run high octane fuels that have lead in them. And the lead kills the O2 sensors :D

Drop it in for a look over and see what they say, but 200km per tank city driving isn't right.

J

Jay95R33 that is really good mileage for an R33! I consider getting to 400 on mine to be very good mileage. If I've been a leadfoot or have been in a lot of traffic I'll get up to 50 k's less than that.

95GTST, your car already has a fuel pressure regulator, and it won't really affect your economy at all if faulty. Upgrading it will only help stop leaning out, ie, if anything it will make you use more fuel! Something else is wrong, as Jay says it's probably the O2 sensor.

As for other things that will help your economy in general terms - thinner oil if your engine is in good enough condition, and higher tyre pressures (40psi or so).

i get 450km per tank consistantly, city driving. only mods are pod, and catback exhaust. i have got 480km before, and the fuel light only just came on then. i get 450km with normal driving, but not soft, giving it a thrash here and there still. havent given it a proper country/highway only run yet.

I usually get 320-360 city driving and 400-450 country driving, only mods I have are pod and 3". And I drive like a girl too, no thrashing it :D

I've had it all checked out and apparently theres nothing wrong with it and its not using too much fuel, so they say!

I get 550-560kms freeway driving at 100km/h off boost. The last 40kms the fuel light is on :D (hehehe)

Hammering it constantly (ie, a cruise) I'll get 450kms (last 40kms with light on also)

And mine throws flames out the exhaust when downshifting and accelerating being a leadfoot.

Go figure.

yes 95gtst ive been through this when i picked my 33 up i thought what the when i only got about 250-300 out of a tank. tested my o2 sencor (it was dead) so wacked one in, changed the plugs and am know getting around 400 with no fuel light around town (60%) or around 9 litres per 1oo km. havent checked it on a trip yet.

its interesting a thread like this has come up, i always get about 400Km to a tank, maybe 350km if i have been on boost a lot, this is city driving (i never country drive).

On saturday when i was at my mates trying to cut the lock wire (i still don't know what colour if anyone can help) we had a fiddle with my blow off valve. its a HKS SEQ blow off valve and we undid the screw on top another turn, now it seems to blow off much louder and more often? it sounds like it is bleeding boost while i am driving but when i look at my boost gauge it says i have vacuume. Anyway i filled it up that day and i still have about 1/3 maybe a bit more of a tank left and i have done 350Km. so i will prob get about 466km out of the tank.

i thought i would get less km out of the tank by doing this. my mate hasn't looked but he said if i have a map sensor it may save me petrol?

Originally posted by DREMEN

I get about 350 - 400km's per tank :)

Anyone know how to test the o2 sensor to see if its dead?

350-400 is completely normal, I wouldn't worry about it. Unless that's only freeway driving.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...