Jump to content
SAU Community

Recommended Posts

  • Replies 268
  • Created
  • Last Reply

Top Posters In This Topic

GTA 4 is being censored for aus :wave: time to cancel my preorder :)

Also time to hit up play-asia you can grab it there for about $70 :(

Originally it was going to be censored and wasnt at the time of my post, after the petition for R18+ games fell through a few weeks ago, looks as though things have changed.

also buying from play asia and other places is GTAIV region free, just thought id remind people that dont understand about pal and ntsc consoles/games.

Yes but you cant get a PAL version from there

No

Just to make it clear for both platforms

PS3 region free, you can buy anywhere Play asia sounds like a good deal

Xbox 360 - must be pal, you cannot get it at play asia. Try uk website or do what i did and get it on ebay.

So basically after reading most of that, the only thing thats been cut is just one scene in the story mode? So the aussie version is still the same gameplay as everywhere else and should not affect online multiplayer games right? Still deciding whether to get uncut or not.

for one scene? who gives a rats ass

like you dont just try and skip that shit anyway

considering you can get the uncut version (whether its one scene or not isn't the point) for $40-$50 cheaper than you can get the cut version here...

you guys had better read this:

Another day, another drama about Grand Theft Auto IV. To follow up from yesterday's story about an alleged statement from Take Two Interactive claiming to explain what has been cut from the Australian version :woot:of the game, I've just gotten off the phone with Rockstar Games.

They confirmed that the statement currently circulating is not correct, and any rumours that have come from it are just that - rumours.

Personally, I'll be very happy once the game's released and people can concentrate on Niko and his escapades, rather than sitting around fretting about what may or may not have been included, what may or may not have been cut, and why Australia (and New Zealand) are missing out on things that the rest of the world gets to enjoy.

Bring on April 29th, I say. Hype should be about the game, not about the politics.

http://games.internode.on.net/content.php?...ews&id=2926

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...