Jump to content
SAU Community

Recommended Posts

Times change Simon, when you competed at my comps I didnt allow belts, knee wraps or wrist wraps, all squats walked out

Now at PTC we have a monolift, specialist DL bars, specialist squat bars, lots of my competing lifters wear belts, they all wear knee wraps and most wear wrist wraps when benching

Still proud to say my strongest, Jack, who squats 300kg, benches 185kg and deadlifts 300kg, has never worn a belt, but he is only 21

Drop in when youre in Vic next

I should also point out that back then, no one squatted 200kg, benched 150kg or deadlifted 250kg

We now have 13 that squat 200kg, 12 that bench 150kg and 13 that deadlift 250kg, including 6 lifters who can do all 3, with 3 of them aged 21, 20 and 19

Future looks bright

I should also point out that back then, no one squatted 200kg, benched 150kg or deadlifted 250kg

We now have 13 that squat 200kg, 12 that bench 150kg and 13 that deadlift 250kg, including 6 lifters who can do all 3, with 3 of them aged 21, 20 and 19

Future looks bright

What sort of weights are these lifters at? Or doesn't that matter?

Does height ever come into it? Always seems to be excluded from factoring...I'm curious as to why, as I would have thought tall guys had a bit of a disadvantage...given how much extra weight height can give you.

Does height ever come into it? Always seems to be excluded from factoring...I'm curious as to why, as I would have thought tall guys had a bit of a disadvantage...given how much extra weight height can give you.

The bigger the frame the more muscle can be put on it.

Look at the world's strongest man competition for example, only a couple of the guys are just under 6 foot. Most are well over 6 foot.

And i'm not sure now, but a couple years ago the world pl records were held by guys over 6 foot.

I think limb length is what can be a factor, not whether you are tall or short. A tall guy with short arms may bench better than a short guy with long arms.

sound like an excuse. :D

Of course it's an excuse, but it's nice to know who has natural advantages and disadvantages in this sort of thing; what creates them.

When it comes to competition where weight classes exist...the olympics, for example...I didn't see many 6'3 guys doing clean and jerks in London. In anything but the open / max weight classes, it seems height is a disadvantage.

The bigger the frame the more muscle can be put on it.

Look at the world's strongest man competition for example, only a couple of the guys are just under 6 foot. Most are well over 6 foot.

And i'm not sure now, but a couple years ago the world pl records were held by guys over 6 foot.

I think limb length is what can be a factor, not whether you are tall or short. A tall guy with short arms may bench better than a short guy with long arms.

Thanks for that info. When you say frame size, does this only refer to height or can body width (e.g. shoulder span, waist, bone structure etc.) be a factor in it?

More height = more muscle can be put on (overall bodyweight) and IMO bodyweight is proportional to the amount you lift. i.e. 100kg person lifts 160kg dl thats only 1.6xbw, 75kg person lifts 150kg dl thats 2xbw. So the 75kg person maybe lifting less but overall he is proportionally stronger than the heavier person, but of course the heavier person will have an ego and be like "bro I can lift more than you"

Edited by Dani Boi

height is obviously a factor in olympic weightlifting, the taller you are the higher you have to get the bar to get underneath it... shorter arms also help but there are exceptions to the rule

powerlifting I don't think height is as much of a factor... long arms help with deadlifting, short arms better for bench... squatting no idea? might be hard with a long torso to stop the weight folding you in half?

weight is a much bigger factor and the proportion of limb lengths in relation to optimal leverages... but at the end of the day strong is strong (that's my new favourite saying... along with 'strong people are harder to kill'... thanks markos)

hot down here today... summer is almost here... can't wait to be sweating my arse off in a gym with no air con... at least you need half the time to warm up lol

love working out in the sunshine... might have to get a shitty old rack for outside... wife should love that idea

Damn public gyms.

Lastnight there was a tiny brunette hussy wearing the shortest and tightest little shorts...perfect body shape and without a doubt the hottest thing I've seen at a gym...parading herself from room to room, "testing out" machines and giggling out loud to her grenade friend. I swear she signed up just for attention...and she was getting it; everyone looking.

And then she did stretches and splits on the exercise mats hnnnnnnnnnnnnng probably a gymnast. I can't work out with this shit.

Well there are weight classes

60kg, 67.5kg, 75kg, 82.5kg, 90kg, 100kg, 110kg, 125kg, 140kg, 140kg+. You must way UNDER the weight

Our best lifters

75kg class - Emad Nayef 220kg squat, 125 bench(injured, has done 150kg) and 260kg deadlift, in competition, best total 602.5kg (35yo)

82.5kg class - Martin Nguyen 227.5kg squat, 132.5kg bench press , deadlift 272.5kg, best total 632.5kg (teen, 19)

90kg class - Max Markopoulos 250kg squat, 155kg bench, 245kg deadlift, best total 650kg (20yo)

140kg+ - Jack Pollard 280kg squat, 185kg bench, 280kg deadlift, best total 745kg 21yo)

All 4 lifters have lifted more in the gym, but these are comp results only

Damn public gyms.

Lastnight there was a tiny brunette hussy wearing the shortest and tightest little shorts...perfect body shape and without a doubt the hottest thing I've seen at a gym...parading herself from room to room, "testing out" machines and giggling out loud to her grenade friend. I swear she signed up just for attention...and she was getting it; everyone looking.

And then she did stretches and splits on the exercise mats hnnnnnnnnnnnnng probably a gymnast. I can't work out with this shit.

And you didn't approach her to ask for "stretching advice"?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...