Jump to content
SAU Community

Recommended Posts

A carb is not a carb. A sugar drink is not the same as a bowl of oats.

1000 calories of big m is not the same as 1000 calories of steak.

Your body utilises proteins different to sugars, and fats different to either also.

I mean, that's pure basics. Why do you take a protein shake after a workout and not a tub of lard??? It's common sense, your body uses different

macro's for different things.

And fruit is not a ball of sugar. It's natural, comes from the ground, is full of vitamins, minerals, antioxidants, fibre and is just down right good for you.

A healthy body is a happy body, and a happy body is ALOT easier to work with.

While you didn't directly say everything that comes from the ground is good for you, in certain situations in life - like when making a statement or declaration to police - this wording could be construed to mean exactly that.

A statement to police, you've got to be joking.

I was talking about fruit, you know, what you buy at a fruit shop.

Seriously, if you guys wanted to act like retards, then you'll be treated like retards.

F this i'm out

Loving 1.25kg plates...been using them to step up bench and, whilst I do notice they are on there (2.5kg increase combined)...after a week or two of the new weight, I'm doing the same reps as I did before I put the plates on.

Troy, whatever you're doing, keep doing it, and share some of it around, f**k. It's like you grew a chest in 1.5months.

Coz of the current tone of this thread, I'm not sure if you're being sarcastic or not lol.

I'll assume you're not, so yeah over the last couple of months I've focused much more on incline press than just flat bench. Likely culprit.

Loving 1.25kg plates...been using them to step up bench and, whilst I do notice they are on there (2.5kg increase combined)...after a week or two of the new weight, I'm doing the same reps as I did before I put the plates on.

Did you not used to have them? I doubt I could progress without them on bench!

Loving 1.25kg plates...been using them to step up bench and, whilst I do notice they are on there (2.5kg increase combined)...after a week or two of the new weight, I'm doing the same reps as I did before I put the plates on.

I can't bare putting those little f**kers on... I know I should but they just look so silly!

yes, the usefulness of small weights are so underestimated - people always worry about how much weight it looks like they have on their bar (this is so stupid) but screw that, use those small weights to make your improvement each week!

edit: HAHAHA nick i was typing that and as soon as i posted, yours appears before mine: point illustrated.

Edited by darksky34

Did you not used to have them? I doubt I could progress without them on bench!

could if you squatted more....

have looked for those little plates, swear there are only two at the gym i go to

Troy, whatever you're doing, keep doing it, and share some of it around, f**k. It's like you grew a chest in 1.5months.

when I first looked at the pics I was thinking pretty good improvement for 12 months... then I saw his post, 6 weeks! WTF dude

Did you not used to have them? I doubt I could progress without them on bench!

They were always there, but pretty much what Nick said. There's some psychological barrier about using them, like you're not making much difference by putting them on or it'll be a pointless increase. Only ever stepped up with 2.5kg or 5kg plates. But when you rationalise it, 1.25kg plates, even every 2 weeks is a good increase. You give it 2 months and that's a potential 10kg on your bench, just takes patience. I doubt that by adding 10kg straight up, you would accommodate the reps after 2 months (unless you're a noob still getting noob gains).

Now I'd use 500gm plates if I had them!

Nick start using them, they are a godsend.

when I first looked at the pics I was thinking pretty good improvement for 12 months... then I saw his post, 6 weeks! WTF dude

dat der celltech?

Edited by GHOSTrun

when I first looked at the pics I was thinking pretty good improvement for 12 months... then I saw his post, 6 weeks! WTF dude

I can't say it's exactly 6 weeks. The first picture was taken well before the "cut" and switch to incline press, though I looked almost identical to it when I started the 6 week period regardless. The pictures were more to illustrate fat loss (which the first one doesn't show very well).

More or less, yeah that change was 1.5 months though, give or take from inaccuracy of first picture.

dat der celltech?

NAH BRO IT WAS ALL THE ALBUTEREX.

hahaha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...