Jump to content
SAU Community

Recommended Posts

A carb is not a carb. A sugar drink is not the same as a bowl of oats.

1000 calories of big m is not the same as 1000 calories of steak.

Your body utilises proteins different to sugars, and fats different to either also.

I mean, that's pure basics. Why do you take a protein shake after a workout and not a tub of lard??? It's common sense, your body uses different

macro's for different things.

And fruit is not a ball of sugar. It's natural, comes from the ground, is full of vitamins, minerals, antioxidants, fibre and is just down right good for you.

A healthy body is a happy body, and a happy body is ALOT easier to work with.

While you didn't directly say everything that comes from the ground is good for you, in certain situations in life - like when making a statement or declaration to police - this wording could be construed to mean exactly that.

A statement to police, you've got to be joking.

I was talking about fruit, you know, what you buy at a fruit shop.

Seriously, if you guys wanted to act like retards, then you'll be treated like retards.

F this i'm out

Loving 1.25kg plates...been using them to step up bench and, whilst I do notice they are on there (2.5kg increase combined)...after a week or two of the new weight, I'm doing the same reps as I did before I put the plates on.

Troy, whatever you're doing, keep doing it, and share some of it around, f**k. It's like you grew a chest in 1.5months.

Coz of the current tone of this thread, I'm not sure if you're being sarcastic or not lol.

I'll assume you're not, so yeah over the last couple of months I've focused much more on incline press than just flat bench. Likely culprit.

Loving 1.25kg plates...been using them to step up bench and, whilst I do notice they are on there (2.5kg increase combined)...after a week or two of the new weight, I'm doing the same reps as I did before I put the plates on.

Did you not used to have them? I doubt I could progress without them on bench!

Loving 1.25kg plates...been using them to step up bench and, whilst I do notice they are on there (2.5kg increase combined)...after a week or two of the new weight, I'm doing the same reps as I did before I put the plates on.

I can't bare putting those little f**kers on... I know I should but they just look so silly!

yes, the usefulness of small weights are so underestimated - people always worry about how much weight it looks like they have on their bar (this is so stupid) but screw that, use those small weights to make your improvement each week!

edit: HAHAHA nick i was typing that and as soon as i posted, yours appears before mine: point illustrated.

Edited by darksky34

Did you not used to have them? I doubt I could progress without them on bench!

could if you squatted more....

have looked for those little plates, swear there are only two at the gym i go to

Troy, whatever you're doing, keep doing it, and share some of it around, f**k. It's like you grew a chest in 1.5months.

when I first looked at the pics I was thinking pretty good improvement for 12 months... then I saw his post, 6 weeks! WTF dude

Did you not used to have them? I doubt I could progress without them on bench!

They were always there, but pretty much what Nick said. There's some psychological barrier about using them, like you're not making much difference by putting them on or it'll be a pointless increase. Only ever stepped up with 2.5kg or 5kg plates. But when you rationalise it, 1.25kg plates, even every 2 weeks is a good increase. You give it 2 months and that's a potential 10kg on your bench, just takes patience. I doubt that by adding 10kg straight up, you would accommodate the reps after 2 months (unless you're a noob still getting noob gains).

Now I'd use 500gm plates if I had them!

Nick start using them, they are a godsend.

when I first looked at the pics I was thinking pretty good improvement for 12 months... then I saw his post, 6 weeks! WTF dude

dat der celltech?

Edited by GHOSTrun

when I first looked at the pics I was thinking pretty good improvement for 12 months... then I saw his post, 6 weeks! WTF dude

I can't say it's exactly 6 weeks. The first picture was taken well before the "cut" and switch to incline press, though I looked almost identical to it when I started the 6 week period regardless. The pictures were more to illustrate fat loss (which the first one doesn't show very well).

More or less, yeah that change was 1.5 months though, give or take from inaccuracy of first picture.

dat der celltech?

NAH BRO IT WAS ALL THE ALBUTEREX.

hahaha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...