Jump to content
SAU Community

Recommended Posts

I like 'STFU and squat'

what about

shhhhh...

...squatting in progress

I went to the gym with a mate yesterday... his gym, some commercial one

he admitted to me he hadn't squatted in a few weeks... so we squatted... he then admitted it had been more like a month or two... had been doing leg press/leg curls instead

apparently he can't walk properly today hehehe

his bench 1RM ended up the same as his squat 1RM... he has some work to do... has very good technique though, nice and deep on the squats and benched to his chest... only started training earlier this year... already has significant physique changes

I've started chopping my squats high.

gotta save the knees - yes I've read everything about deep squats being better for the knees etc.. but my pains tell me different.

only concern is if they are still low enough for comp.

Will know April I guess.

Edited by TTT

you're inviting the guys to look? maybe this:

DON'T

LOOK

DON'T

TOUCH

Well apart from the fact that they will have to look in my direction to read the tee, I don't think I'm going to be able to stop where guys direct their eyes. And honestly I couldn't give a toss as long as they don't interrupt me and aren't looking with these eyes:

creepy-stare-cage.jpg

I like 'STFU and squat'

what about

shhhhh...

...squatting in progress

Hehe I like the shhh squatting in progress, that's really good :)

Trouble with STFU and Squat is that I don't think it's going to get the message across. They'll think I'm just promoting squatting where as I'm actually trying to demote speaking. That's why most of the options I have sound a bit wankerish. I'm not really a wanker, but I'm prepared to look like one if it gets the job done.

Maybe even:

HERE TO

TRAIN

NOT TO

TALK

and can add or not add: (SO STFU & SQUAT) underneath

I've started chopping my squats high.

gotta save the knees - yes I've read everything about deep squats being better for the knees etc.. but my pains tell me different.

only concern is if they are still low enough for comp.

Will know April I guess.

Cannot believe im reading this, what have you done with the real TTT!!!

I agree though, i get medial right knee pain if i try to go to low. Parallel or a bit below is about my limit unfortunently...

I've started chopping my squats high.

gotta save the knees - yes I've read everything about deep squats being better for the knees etc.. but my pains tell me different.

only concern is if they are still low enough for comp.

Will know April I guess.

when I went to physio earlier this year, he said squatting helps the joints. You probably dont do leg extensions which are apparently the worst for your knee.

have you seen a pysio about the knees?

+1 to right medial knee pain

yep read all the research too but my knees only started hurting when I began squatting to proper depth... never bothered me at all before... I think it's due to having super tight hip flexors/quads so when you get a decent amount of knee flexion the quad is pulling on the knee joint... but that's just my own bro science at work

hurts when its cold but once warm is okay... I keep meaning to buy some knee sleeves to train in... the first couple of warm up sets are always fairly uncomfortable

playing basketball doesn't bother my knees at all

Or the next time someone tries to interrupt with coaching/groping you could just say I'm right thanks. The regulars will soon learn not to talk to you and there's only so many. Bonus of this is you won't look like you're full of yourself for the people who wouldn't have approached you anyway.

Yeah Birds, but then I won't be able to make shirts :3

I'm sure I can decline on help, but boys can be persistent even when I slip the boyfriend word in my first sentence. And I find it hard to refuse normal conversation :/

I've started chopping my squats high.

gotta save the knees - yes I've read everything about deep squats being better for the knees etc.. but my pains tell me different.

only concern is if they are still low enough for comp.

Will know April I guess.

Knees are confuddling. Mine started crackling as I ran a while back so I stopped running. Every time I would stand up from a squat the crackle was audible. So I stopped squatting too. Turns out it's just because I haven't exercised much in my life and my cartilage needed to break down. You wouldn't get it if you had exercised consistently. Weird how something that seems bad can be normal.

But it's certainly different from having actual pain. Get that shit checked!

Have you lot tried ATG with a super light weight, even body weight or barbell only to try and condition your joints for ATG?

I used to do parallel squats, got to ~120kg for a set of 10, then decided my form was starting to suck (not quite making parallel etc.). So I started from the star...said f**k the weight...barbell only and hammies touching calves this time. Felt incredible just having that huge ROM for a movement. Moved up to 40kg and I still remember how surprisingly worked I felt after 10 reps with such a pissy looking weight. It felt much harder than my old 80kg warm up with parallels. Now, within 2 months I've moved up to 75kg x 10 ATG...no knee pains...just wanna collapse to the floor at the end of a set. Legs are significantly bigger than they were with 120kg parallels and I cannot wait until I'm doing the old weight, only with much much better form.

ATG also involves the glutes more, so you get good development *Forrest Gump voice* in the buttocks. We deadlift from the ground, so too i think we should we squat from there (if we can). Any life situation where the squat is going to come in useful, like giving piggy back rides to overweight people...are you gonna make them jump on you from parallel? Come on...

yeah I've reset my squat numerous times... starting out light, getting deeper each time... my mobility is poor so getting to proper depth has been a long process

pausing at the bottom for a few seconds helps stretch everything out

pretty good now, just knees acting up a bit... probably just a bit of tendonitis... okay once warm

the wider your stance/the more you sit back the less flexion in your knee to get to depth... the more your knee travels forward over your toes the more knee flexion... I probably squat a bit narrow and don't sit back enough which is putting pressure on my knees... oh well, just a bit of discomfort... nothing opening a can of harden the fck up can't beat;)

+1 to right medial knee pain

yep read all the research too but my knees only started hurting when I began squatting to proper depth... never bothered me at all before... I think it's due to having super tight hip flexors/quads so when you get a decent amount of knee flexion the quad is pulling on the knee joint... but that's just my own bro science at work

hurts when its cold but once warm is okay... I keep meaning to buy some knee sleeves to train in... the first couple of warm up sets are always fairly uncomfortable

playing basketball doesn't bother my knees at all

Why don't you get your hip flexors relieved if you think it's an issue? It's only remedial massage. Makes me feel sick when getting them done, always improves range of motion though.

What sort of footwear do you use? Ive been reading a lot lately that squat shoes help depth when doing an oly style lift (narrow stance)

Edited by jangles

I've started chopping my squats high.

gotta save the knees - yes I've read everything about deep squats being better for the knees etc.. but my pains tell me different.

only concern is if they are still low enough for comp.

Will know April I guess.

Just use a wider stance. It will help air out your va.........

Have you lot tried ATG with a super light weight, even body weight or barbell only to try and condition your joints for ATG?

I used to do parallel squats, got to ~120kg for a set of 10, then decided my form was starting to suck (not quite making parallel etc.). So I started from the star...said f**k the weight...barbell only and hammies touching calves this time. Felt incredible just having that huge ROM for a movement. Moved up to 40kg and I still remember how surprisingly worked I felt after 10 reps with such a pissy looking weight. It felt much harder than my old 80kg warm up with parallels. Now, within 2 months I've moved up to 75kg x 10 ATG...no knee pains...just wanna collapse to the floor at the end of a set. Legs are significantly bigger than they were with 120kg parallels and I cannot wait until I'm doing the old weight, only with much much better form.

ATG also involves the glutes more, so you get good development *Forrest Gump voice* in the buttocks. We deadlift from the ground, so too i think we should we squat from there (if we can). Any life situation where the squat is going to come in useful, like giving piggy back rides to overweight people...are you gonna make them jump on you from parallel? Come on...

I thought ATG was the only way to do them :/

yes.. seen different physios, seen doc etc etc.

Physio ended up suggesting I squat as low as I need to.

I've stretched, I've rolled, I've massaged.

I've done the 10 minute squat test (find that one on mobilitywod.com and see how much you like it)

My right knee is just more f**ked than my left.

It doesn't bend as much as my left one.

So because of this, at the very bottom of a squat for me, it makes my hips pull out of center.

now add double body weight to the bar and that little issue is compounded many times.

it's not a muscle tightness thing.

it's all in the knee.

And I'd rather not have it operated on.

If my chosen sport says you have to squat to "this" depth, and I can do that, then I will.

Tom - I've gone a little wider.. the sand is falling out

Lol.. you should see how high my squats are when I start the warm ups.

Why don't you get your hip flexors relieved if you think it's an issue? It's only remedial massage. Makes me feel sick when getting them done, always improves range of motion though.

What sort of footwear do you use? Ive been reading a lot lately that squat shoes help depth when doing an oly style lift (narrow stance)

I foam roll them, it helps... but 10 years of sitting at a desk all day has taken a toll

bought some Do Wins olympic lifting shoes a few months ago... they're great, love them

TTT: 10 minute squat test... NEVER AGAIN lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • I also got the same floor mats for a bit of extra bazzaz haha
    • Some more close up pics now that I’m back to working on the car, the loop pile is nice but again haven’t compared it to the other types in person, it’s hard to tell from the pics on the website. View of the hemming on the edges too, it comes in 2 pieces - front and back, honestly very happy with it for anyone on the fence.  Also attached my previous pics from further up as it didn’t let me post them directly before. (Nothing worse than photo bucket pics that aren’t hosted anymore years later)
×
×
  • Create New...