Jump to content
SAU Community

Recommended Posts

i dont normally take a pre workout simply because I have never noticed a difference in the past when I have taken them.

only gave this one a try as the guy gave me a whole bunch of samples.

didnt read into the marketing. GAT does market a bit like that, but I have read good things about their products.

end of the day it was a sample, I gave it a go and first test was a good one. I have 3 or 4 more samples of it which I will try and report back on.

so these are the claims;

1)SUPER-INTENSIFIED ENERGY*
2)CLINICALLY PROVEN PRO-TESTOSTERONE*
3)REACTIVE HYPEREMIA (MUSCLE PUMPS)*
4)DMAE INFUSED, MIND-IN-THE-MUSCLE FOCUS*
5) ROAD MAP VASODILATION*

What it actually means

1) It's got some calories
2) Doesn't raise testosterone beyond normal or at all in the case of a healthy person (hence not illegal)
3) So what
4) placebo
5) Only applicable if you are lean. If you are a juiced up body builder you have what you need already.
yet another 'short cut' promise that tastes like apples.

so these are the claims;

1)SUPER-INTENSIFIED ENERGY*
2)CLINICALLY PROVEN PRO-TESTOSTERONE*
3)REACTIVE HYPEREMIA (MUSCLE PUMPS)*
4)DMAE INFUSED, MIND-IN-THE-MUSCLE FOCUS*
5) ROAD MAP VASODILATION*

What it actually means

1) It's got some calories
2) Doesn't raise testosterone beyond normal or at all in the case of a healthy person (hence not illegal)
3) So what
4) placebo
5) Only applicable if you are lean. If you are a juiced up body builder you have what you need already.
yet another 'short cut' promise that tastes like apples.

In my experience with Bulk Nutrients' Cognitone PWO, DMAE is more or less the only thing in it that I notice a very distinct benefit from. It's just another analogue of DMAA I believe, and DMAA gave me a very noticeable increase in mental focus....so I guess I'm saying in my opinion, it's far from a placebo.

Like t-boosters. Most only raise your test by 42%. An increase of well over 200% is needed for any real muscular results

I disagree Tom, please stop spreading unfounded misinformation like this.

They raise it by 48%. Get it right.

  • Like 1

dollar for dollar, injecting test would be much cheaper when actual effects are concerned lol

Step 1 - engage in dat dere sexy time 5 times in one day

Step 2 - go to doc, say you can't get it up, request blood test to analyse t-levels

Step 3 - t-levels come back lower than normal (yeah you knew this would happen; inb4 sabotage)

Step 4 - get prescribed test therapy and reap the reward of dem gainz for cheap

might as well cut to the chase and start pinning.

Speaking of which, do pro powerlifters use gear? Probably a Markos question, not judging, genuinely curious.

In an untested federation? Probably. In any competitive environment where people devote their lifestyle towards a cause, you can be sure people will be doing everything they can to get the best out of themselves and get an edge on competition. People do it in tested environments like the Olympics; I don't see why they wouldn't in a situation where it is legal. I would if it was my sport.

Every 2nd guy (ok maybe 3rd guy) in my gym is on the gear. Most are happy to admit it too, although its pretty obvious on most. That's in an environment where not many care about what you lift.

I can assume in an competitive environment where testing is not as prevalent the use of the stuff would be frequent. You can get it from anyone nowadays and that makes it even more widespread.

Although its a shame and a sign of the times when whenever there is someone who looks well built or lifts big people assume steroid use...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...