Jump to content
SAU Community

Recommended Posts

markos' email in below link

http://gpcaustralia.com/index.php/contact-us

It is a PDF file Markos emails to you.

His gym results speak for themselves, plus people on here have used it with good success.

It's not your normal bodybuilding.com 6 week transformation though.

However Markos would also be the first to tell you that the results obtained in his gym are not just from the right program and diet ;) Sounds like PPP is similar to 5/3/1

Can somebody recommend a good supplier of semi commercial equipment? In Brisbane would be great, but at the moment the place that I am leaning towards is from Gym Direct in Sydney so anywhere that does a decent price

Looking at getting a full set of dumbbells and a power rack

I was trying to source some stuff from China through www.chinakettlebell.com but am getting inconsistent and very slow responses, and this is before I have handed any money over, so don't want to transfer cash and then wait 6 months to receive goods of questionable/unproven quality.

Cheers, will have a look and get in contact with them

Just so people know specifically what I am after and what price I am looking to beat, these are the two items I am looking at ordering from Gym Direct:

http://www.gymdirect.com.au/item/8-Package-Deal_-Commercial-Power-Rack-+--Bench-+-Thrusting-Bearing-Olympic-Bar--+-150kg-colour-Bumper-Plates/618.htm

http://www.gymdirect.com.au/item/PRO-STYLE-RUBBER-FIXED-DUMBBELL,-2,5KG-to-50KG,-20-pairs/207.htm

However Markos would also be the first to tell you that the results obtained in his gym are not just from the right program and diet ;) Sounds like PPP is similar to 5/3/1

Effort is a big contributor to everything.

It's similar in that they are both a progressive training program, which imo, everyone should do.

PWND - http://www.southsidefitness.com.au/ , local and cheap as FUUURRRRKKKK!! find a cheaper price, print it out, and they will beat/match it, it's all in the negotiation ;)

They look pretty good. Will pop in there in person tomorrow.

So i have had a bet with my mates in the last 4 months, who could get the best abs.

So joined a gym in the last 3 months, was pretty much a 2 month bulk to a 2 month cut

I started at about 73kg, went up to 77kg when bulking and now down to 71.5 kg on a cut

$400 pot with the deadline this Saturday

Progress so far: nohomo

Before:

1472760_760840300596998_1408812241_n.jpg

After:

1457757_760840303930331_169083069_n.jpg

decent progress mate.

need to tan up it will help your abbs shine

also look into getting rid of the water prior to Saturday so you can go in dry and looking even leaner.... just to try and win is all :P

decent progress mate.

need to tan up it will help your abbs shine

also look into getting rid of the water prior to Saturday so you can go in dry and looking even leaner.... just to try and win is all :P

Cheers mate

Think im a bit late for a tan lol unless its a fake one

I read alot about water loading and deloading, carbs loading and what not

Then I watched Layne Nortons video blog on it then decided not to do it :/

Cheers mate

Think im a bit late for a tan lol unless its a fake one

I read alot about water loading and deloading, carbs loading and what not

Then I watched Layne Nortons video blog on it then decided not to do it :/

You can cut water because you aren't lean if it's just mucking around for a bet.

Layne's point is If you have to cut water for a comp, you just aren't lean enough.

You can cut water because you aren't lean if it's just mucking around for a bet.

Layne's point is If you have to cut water for a comp, you just aren't lean enough.

So i just continue as I am and cut water say 4p.m Friday. The 'show' will be 9a.m Saturday

Should I load up on water today and Thurday then?

So i just continue as I am and cut water say 4p.m Friday. The 'show' will be 9a.m Saturday

Should I load up on water today and Thurday then?

depends how serious you are about winning

I lost plenty of water weight prior to some mma bouts, but its not as simple as just not drinking - again depending on how serious you are and how much you want to loose.

start loading up on salt with your meals, then 24 hours prior to cut salt completely.

at a minimum id cut water 24 hours prior to the end of the comp and get nice and sweaty. If you can do some cardio which will help get more out. Its old school, it sucks balls, you will hate life, but will work

What do the abs look like front on? And how are your mates going, have you seen their progress?

I'd be drinking alot of water today and a bit tomorrow.

2 other mates are going ok

1 other mate has lost about 15% of his body weight, and he was already pretty lean to begin with :unsure: I haven't seen his abs yet though, but he is very competitive

Ill take a pic when I get home from work, don't think it will be as impressive lol

depends how serious you are about winning

I lost plenty of water weight prior to some mma bouts, but its not as simple as just not drinking - again depending on how serious you are and how much you want to loose.

start loading up on salt with your meals, then 24 hours prior to cut salt completely.

at a minimum id cut water 24 hours prior to the end of the comp and get nice and sweaty. If you can do some cardio which will help get more out. Its old school, it sucks balls, you will hate life, but will work

Cheers brah!

Ill give this a shot

I was going to do this. But after watching this video decided not to

But as Jangles said maybe I misinterpreted the video

and when you pose, lean back slightly, it will help bring the abbs out a little more

Will do!

Seriously though, pretty good effort there.

My advice: between now and your showing: eat only chicken breast and broccoli, three times a day. Continue your training, and train lots of volume (9-10 sets per exercise) with heavy weights. Literally bugger yourself so you're too tired to drive home. When you get home do some HIIT sprints.

I don't think it's worth stopping water for, and sometimes abs look fuller when you are hydrated IMO.

Oh and rememeber to stand under the light :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hot tip, stop picking at shit. Live in bliss instead   From my recent experience in rust repairs, white it may seem to not go much further back, you'll still need to cut back a bit further.  From what I can see there, the outer skin, and the inner is rusted too. From what I can see you've got the inner one which is all structural, and window likely affixes too.   If tag Murray Calavera here, but my phone won't let me tag him, he'd probably be able to give the best advise.   I do know, welding roof panels is a right pain in the bollocks! Very heavy to heat distort the roof and warp it all.
    • Some of the filler.   Also if I look under the top flap of metal it starts looking good quite close to the edge. I get the feeling it doesn't go much further.
    • So, I finally started digging at the bit of my roof that was cracking and bulging a bit. Well, it was just thick filler that was covering some pretty bad rust. I didn't find the edges, I was too bummed to keep going.  There are a few holes as you can see. There was just so much filler but looks like no attempt under the filler to prime or use rust converter, just slapped filler on exposed rust.  Anyway, I'm going to take the windshield out and find the edges. I'd love to fix this myself as I'm pretty sure it'll be expensive to get done properly. I was thinking I could just get a cut piece from another E39 and just weld it in place as it would be the right size and shape.  Thoughts?
    • This is the territory of the "Stage 1/2/3 Golf GTI/R" or otherwise off the shelf tune with (relative to before) minor mods. It's easier now. Downpipe and Tune and boom, big increases. Stage 1 OEM+ is where it's at. This is where the niche evolved into and it's really easy to see why. It's rare to even NEED to consider changing turbos or going to aftermarket ECU's or building bottom ends for more power. Stage 1-2-3 will get you a LONG WAY. Civic Type R turbo GR Yaris/Corolla Anything with B58 (MKV Supra/x40i) Anything BMW in General Anything Audi in General Any turbo AMG RenaultSport Turbo offerings Korean Elantra N/I30N Ecoboost Mustangs Focus RS? List goes on. I would argue in the future it won't even need to go on... M3P is pretty rapid out of the box...
    • There is a way, but it's not with the same cars. You need to find the same vintage of car, that we had. Realistically, that was an affordable car with aftermarket parts around. So what people need to find is a car that had a decent base in its day, and can be modified. They're looking for a car year make of 2010 to 2015 really... Aus could have done it if Holden didn't fold as V8 commodores were cheap, and if Ford didn't get expensive thanks to COVID, then you could cheaply play with FG Barras. Realistically, those are just a bit heavier, four door skylines. I'm sure the US and UK have similar cars they could find.
×
×
  • Create New...