Jump to content
SAU Community

Recommended Posts

Good news on my abdomen, it seems I only tore some muscles and not another hernia, no heavy lifting for a while though.

So today I started some GVT, day 1 was chest and middle back, 10 x 10 of DB bench followed but 1 arm row for mains.

As I haven't done a lot of volume for a while 100 reps of each although with a light weight I am feeling it now.

3 months of this should be interesting.

I'll drop in my program once I've been through it and am happy with it.

Sadly no squats, cleans or deads in it till my current injury is sorted.

I'm using 600mm step ups and RDL for legs if the guts can cope.

100 step ups should be interesting, I'm also waiting for Thursday when I'm meant to do 10 x 10 of heaves, I assume I will need more than 10 sets to get the 100 out.

Fun times ahead, LOL.

  • Like 2

Did some legs today against the doctors orders. Only did real light weight and made sure i had correct form. Only exercise that gave me a lot of grief was squats.

Have pulled up real tight. Will see how it is in the morning

Good news Bird, well done!

Here's my update.

I took random bathroom selfie to text Kate while she was out walking the dog (excuse facial expression, was not meant fo ryou guys).

Still missing a good 3-4kg, so I'm about half way there on what I lost way back when I hurt my back (still not squatting, only doing bike work) also carrying much more mid section fat as you can see (abs could be worse given my ab work consists of a few basisc planks for back strength and some swiss ball morning glory type things).

Still down on all lifts also after that shoulder strain which is sticking around a little but slowly getting better.

Could be a lot better but given my diet has suffered (not that it was ever specific for training but I tried to eat healthy, but with a child, work very busy,etc) and that I'm only getting 3x 30min sessions a week (including a good 10mins of bike) I am managing to maintain some shape at least.

post-23873-0-00741000-1426713070_thumb.jpg

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • 2 spots that my exhaust guy joined the 2 pipes together  Made a big difference. I'm now able to live with it. I can make it louder if I want by removing the HKS caps.
    • Hi all, considering clutch upgrade to support 1130 engine hp from 1650cc injectors on e50 at 85% duty cycle (1650 x (11.85/14.7) x 85%). Narrows down to these three as they can be converted to use gm 26 spline input shaft if I ever want to use transmission with that input shaft (orc1000f and r3c easy/cheap just change center hub; tr2cd pricier must change clutch discs). Pricing orc1000f similar to tr2cd, r3c about usd 200 pricier. Orc1000f triple plate 200mm. Tr2cd twin plate 215mm. R3c triple plate 215mm. Claimed max torque : orc 1000f 723 lbs ft; tr2cd 800 lbs ft; r3c 1100 lbs ft. Why orc1000f triple plate but claims lower max torque vs tr2cd twins? Is orc1000f underrated? Any info maxing out these clutches? Info on street/traffic driveability/pedal feel? Thank you for any info on them.
    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
×
×
  • Create New...