Jump to content
SAU Community

Recommended Posts

bolt in i think, going to look at it tomorow, wanting it to be legal

you will definately need to call your local RTA office and discuss the requirements for a bolt in cage, it may not be legal at all, even with it a bolt in.

you will need to get it engineered as well, so maybe call a local engineer to find out what they need to pass to give you a blue slip for it.

im going to be buying a half cage for my r32, ive looked in the diy/faq thread but cant find anything on installing them, has anyone got any pictures or have any information on how to install them

Hey,

I have just finished putting a half cage in my 33..it may help..mine is road legal with a engineers certificate.

Scotty

YcopY

post-10743-1200371107_thumb.jpg

post-10743-1200371125_thumb.jpg

post-10743-1200371145_thumb.jpg

post-10743-1200371163_thumb.jpg

Hey,

I have just finished putting a half cage in my 33..it may help..mine is road legal with a engineers certificate.

Scotty

YcopY

That cage is bolted to the inner wheel arch!! and can also come into contact with the head in a crash!!! Your engineer is a very brave man (or stupid)

That cage is bolted to the inner wheel arch!! and can also come into contact with the head in a crash!!! Your engineer is a very brave man (or stupid)

Arent all bolt in cages like that though (to the inner wheel arch)?

Im with you about the head clearance, that looks pretty tight there!

Cheers

Ric

mines bolted to the inner wheel arch. Is this no good???

chassis rail my friend...a lot less flex. An inner wheel arch is a single layer of thin sheet metal. Ive also see 1st hand how easily an inner wheel arch folds up in a crash.

Arent all bolt in cages like that though (to the inner wheel arch)?

Im with you about the head clearance, that looks pretty tight there!

Cheers

Ric

if your head can come into contact with the cage (or padding) its illegal...end of story...engineered or not.

so thats all bolt in?

is it now a 2 seater?

which state are you in? do you have any details on what was required eg . distance from head to bars, mounting point specs etc that you can share?

Yep its now a legal 2 seater, Im in NSW, i have to Code of practice for car modifications some where here on my PC, Pm me your email address and i will send it over to you.

Dirtgarage

yes its botled to the inner arch, as the cage was made up by the boys at bond roll bars this is where i was told it was to bolt to, it does have a dirty big bit of steel as a plate under it as thats what the COP for car modification states. But i do understand your point about using the chasiss rail. They are removable rears so i can change that.

I do agree the head clearance is a little tight in that pic but with the seat in its forward position (which is my driving position) it meets the clearance requirements just....

Cheers,

Scotty

is it a cams approved cage or not? bond know what they are doing, but if its not approved you can get knocked back by scruitineers at any cams event. And I don't see the point of a cage if you are not going to hit a track?

check the online cams manual. It was updated 1.1.08 to specifically say non-approved cages can only be used if the scruitineer for the event is OK with it, ie if you strike a dickhead they can ban you. they have been discussing this clarification in rules for years so watch out.

bond can provide the compliance details as long as they built it to the rules

is it a cams approved cage or not? bond know what they are doing, but if its not approved you can get knocked back by scruitineers at any cams event. And I don't see the point of a cage if you are not going to hit a track?

Duncan,

When i ordered the cage i told bond that the car was being setup to drift (competitevly) and this is what i was given. the cage is functional not for show...that would be just wankkie...

Im downloading the cams manual now so i will have a read through it.

Well..After having a read of section 6 - schedule j and re talking to bond it appears to be ok with cams..but im not 100% sure. is there somewhere i can take it to get checked?

Sorry to hijack this thread..

Edited by chippagti

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That R31 was so cool. Only did Orange Park once. Scared the hell out of me.
    • Selling my TE37SLs since I've switched to smaller wheels.  They're for sale in Japan but it's pretty simple to send them overseas; USA excluded, since JPPost isn't sending there at the moment. Specs Front: 18x9.5j +22 5x114 Rear: 18x10j +20 5x114 Price: 320,000 JPY/ 3,285 AUD (current FX rate) Condition: a few scratches here and there, no bends, distortions or cracks.  Tires will not be included for international buyers, I'll get them dismounted before shipping. They're currently listed on yahoo auction and will be shipped in Japan with the tires if they sell here. Shipping costs to Aus: EMS (1-2 weeks): AUD 1,175 (current FX rate) Sea (2 months): AUD 460  (current FX rate)
    • The alloy coolant reservoir has a sight glass, so as long as I can see coolant in the sight glass it's GTG, as for PS, it isn't anything catastrophic if it gets low, and as it hasn't lost a drop since I have owned the car I cannot see it being an issue, even after putting the "big block" 2.5 in....LOL The only time it gets slightly messy is at oil changes, as the oil filter sits above the frame, and I need to use a plastic bottle with its bottom cut off to catch the flow when loosening the filter
    • Good on you for taking on the job, but it is a big one. Even if you have bolt on manifold and turbo, you will need: Post throttle pressure source to boost controller to wastegate (and FPR, and ECU/MAP sensor) Pre throttle pressure source to top of BOV(s) Oil feed - you can take that from the standard port in the middle of the block Oil return to block under the turbo - this is much trickier than it seems to route a decent/wide pipe past the manifold. You really can't use rubber hose because it is way too hot there, and also the oil out of the turbo core is a bit frothy so it needs to have a decent diameter Water feed - you can take that from the standard port in the rear of the block. Water return - mine runs to a T into the heater box return, just make sure you don't create a high point making bleeding hard. All of those lines should use 200 series style teflon braided hose with heat shielding because everything needs to be routed past the manifold. Also a turbo beanie is a really good idea to minimise the chance of the car catching fire (under bonnet lining in particular) You also need to decide a cam cover breathing solution as well, will you vent externally via a catch can (probably illegal) or return to the intake (plumbing required and can oil up everything over time) Keep in mind the intake and exhaust piping in the engine bay will be custom so you either need to be able to fab ally and steel or have someone you can get a car that isn't running to. Get the wideband fitting welded into the dump pipe at the same time. Also, just my opinion, a screamer pipe attracts attention and doesn't add power, I'd plumb it back if you want to be allowed to keep the car on the road. BTW do you know anything about how healthy the motor is, and what power you are targeting? Doubling or tripling the factory power on an unknown motor is a little risky. Also fuel system will need some attention (pumps, high current hanger, direct power and earth feed, injectors etc)
×
×
  • Create New...