Jump to content
SAU Community

Place To Get Steering Wheel Re-trimmed

cosmokram3r

By cosmokram3r,
in Victoria

 Share

Recommended Posts

DivHunter Grand Master

DivHunter

Posted
Posted

afaik most places aren't too keen on retrimming s/wheels as they are so fiddly and difficult to get right, this means they end up costing as much as a new s/wheel. If there is someone that will do it though I might be interested.

Rekin Grand Master

Rekin

Posted
Posted

all r32 wheels look like they've been chewed by a dog haha.

These threads might help

http://www.skylinesaustralia.com/forums/In...hl=retrim+wheel

http://www.skylinesaustralia.com/forums/Up...hl=retrim+wheel

expect to pay around $400~

Hulk1010 Community Regular

Hulk1010

Posted
Posted

I was thinking about a retrim, but then i see so many other nice looking wheels that i could buy instead.

whats the legal limit of a steering wheel? i have a series 1 r33, i don't like the size of the wheel, wouldn't mind something a bit smaller

R32Big_boy Veteran

R32Big_boy

Posted
Posted

I would also say Gary Blackman. He did a few bits and pieces on the Lambo Spider. He has some of the best cars in the sometimes too.

Oh and legal limit of steering wheels is listed on vicroads website somewhere. Spend five or ten minutes looking there.

Al Grand Master

Al

Posted
Posted

Yep i'd definitely go to Gary Blackman; Ant's was done there too.

I'm guessing "Cremorne" is in Richmond or close enough to be called Richmond.

Hulk: I think the legal limit is about 330mm or 350mm in diameter, not 100% sure though :). Also to be legal the s/wheel MUST have a padded center.

archie01 Community Regular

archie01

Posted
Posted

FYI

If it's a r32 steering wheel you want retrimmed and you want it to look as close to stock as possible then Gary will tell u to try and find a good 2nd hander. That's what he told me and that's what i did.

If u don't mind it looking like it's been retrimmed then he does a top job (have seen his work)

cosmokram3r Proficient

cosmokram3r

Posted
  • Author
Posted

Yeah i want to fit a momo but i like the original wheel though plus i need the centre to be padded (I dont want more reasons to get a defect lol) I saw a steering wheel go yesturday on eBay it ended @ around the $300 mark which still wasnt perfect so i'd rather pay the $250 instead of getting a new wheel so i can get it re-trimmed ill have a look at asking Gary for an actual quote.

RottenRoj Rookie

RottenRoj

Posted
Posted

Good idea cosmo,

I thought about getting my steering wheel re-done also coz it looks a bit shite now after getting the gear shift boot, hand brake boot and handle redone at Gary's.

Then recalled that my steering wheel is illegal any way without a padded centre, so Im on the hunt for a replacement.

Anyone know who sells momo or similar quality in Melbourne? they should have some nice stylish padded wheels to choose from.

cosmokram3r Proficient

cosmokram3r

Posted
  • Author
Posted

Yeah its really hard to find good padded wheels ive noticed. I bought one a fake MOMO from the guy i got my leather seat covers from, but couldnt fit it on because the boss kit i bought from gktech for $35 that was supposed to be a universal fit for my car doest fit unless i snap off the tabs for the horn! I want to change my steering wheel but not if it means i have to lose my horn thats stupid.. looks like if i wanna do it ill have to buy a $80 one from autobarn

cosmokram3r Proficient

cosmokram3r

Posted
  • Author
Posted

Just noticed i got a response from Gary Black Trimming.

Hi

Its 242inc GST to recover steering wheels. If there are any repairs or if the wheel needs padding its a extra $22. All our wheels are hand stitched.

Hmmm that doesnt sound too bad imagine how mint it would look when done!

RottenRoj Rookie

RottenRoj

Posted
Posted

Yeah thats what he quoted me too.

He does a great job you wont be disappointed.

I was also considering after market Recaro's because my drivers seat is buggared, but after seeing the price of two new seats with rails and compliance blah blah Its all too hard.

Gary suggested I look for some GTR seats, and said as another option he could redo my front and back seats for around 2.5k incl.. which sounds tempting, and you don't have the hassle of getting a defect for non standard seats.

Anyway I will deal with the steering wheel first, maybe some one will come back to me with a momo dealer?

See attached pic of Garys work on my R33.

PS the boots were done a good 8 months ago, hand brake handle was done on Monday. (Excuse filthy car)

Cheers

Roj

RottenRoj Rookie

RottenRoj

Posted
Posted (edited)

Sorry pic didn't load Ill try it again.

Yeah retrim in leather and fit new rubber if needed to back and front seats along with lose material areas on the doors.

Its alot of work I'm guessing.

Would look Sh@% hot.

post-41942-1201150231.jpg

Edited by RottenRoj
Rekin Grand Master

Rekin

Posted
Posted
Sorry pic didn't load Ill try it again.

Yeah retrim in leather and fit new rubber if needed to back and front seats along with lose material areas on the doors.

Its alot of work I'm guessing.

Would look Sh@% hot.

how much to retrim the handle on the handbrake? looks real nice

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      gtr hood match gt/gtt front fenders?

      By JC71 · Posted

      would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • TurboTapin
      boost source Size Garrett gt28 gen2

      By TurboTapin · Posted

      You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR · Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...