Jump to content
SAU Community

Td05h-16g Specs?

funkymonkey

By funkymonkey,
in Engines & Forced Induction

 Share

Recommended Posts

Dale FZ1 Veteran

Dale FZ1

Posted
Posted

I think that's a MHI product, not Garrett. Trust have some retail rights over specific product, much the same as HKS do with Garrett.

I've got some limited info about Mitsubishi turbos that I can try to dredge up. Meantime, perhaps a search on this forum and via Google?

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3627188
Share on other sites
STATUS Grand Master

STATUS

Posted
Posted

its a good turbo (Not GARRET) but i prefer still to use the 18g (The 18g is designed for 2.2l to 2.5l), the 16g is a little too responsive the exhaust sides are the same (aprt from 8cm vs 10cm) but the comp is smaller on the 16g. I have done lots of work with these as the kits are cheap and comprehensive for DIY'ers.

Spec wise TD05h-16g:

360ps max

comp wheel 46.5mm inlet (60mm total diam) HKS 2530 is 47.7mm (320ps)

exhaust wheel 49.1mm (56mm total diam) HKS 2530 is 53.8mm

Spec wise TD05h-18g:

400ps

comp wheel 50.5mm inlet (68mm total diam) HKS 2535 is 51.6mm (340 ps)

exhaust wheel 49.1mm (56mm total diam) HKS 2535 is 53.8mm

using part number 11520053 on a RB20 gives very good mid and top without to much dough down low (very similar to HKS 2535 but with more tope end)., the 11520031 or 11520033 on a rb20 is very responsive and has great bottom and mid but tapers off up top a bit (very similar to your HKS 2530).

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3627284
Share on other sites
TTT Grand Master

TTT

Posted
Posted (edited)

If I remember correctly, a TD05 big 16G is rated at 350-360hp.

it is the stock turbo on EVO 3's.

usually good for about 200awkw on the 4G63.

It is also only oil cooled.

what is the HKS 2530 rated at?

edit - I see above.

seems like a downgrade.

Edited by GTST
Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3627293
Share on other sites
funkymonkey Grand Master

funkymonkey

Posted
  • Author
Posted

Roy and I have TD06-25G's... which are a world of difference.

cheers fellas... Sorry I meant GReddy, not Garret in the original post. I tried doin a google search and all I could find were people with Evo's discussing them (now it makes sense why).

Looking at doing a 2.4L stroker on the RB20 and running twin turbo's (just to be different I guess) ... I know twin TD05H-16G's work with this setup... just wondering if twin GT2530's could as well. looks like they might not be responsive enough in this application.

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3627369
Share on other sites
STATUS Grand Master

STATUS

Posted
Posted

Ah the 3-bolt type (not T3 part like i listed above) same specs but on a 2.4 i would hazard full boost threshold would be around 4600-4700rpm in twin form. On a 26 in twin form and ext gate they are on fully by around 4300-4500 depending on engine specs.

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3627415
Share on other sites
Roy Grand Master

Roy

Posted
Posted
Roy and I have TD06-25G's... which are a world of difference.

cheers fellas... Sorry I meant GReddy, not Garret in the original post. I tried doin a google search and all I could find were people with Evo's discussing them (now it makes sense why).

Looking at doing a 2.4L stroker on the RB20 and running twin turbo's (just to be different I guess) ... I know twin TD05H-16G's work with this setup... just wondering if twin GT2530's could as well. looks like they might not be responsive enough in this application.

NOPE. Mine is only the 20G. If you have the 25G i would be interested in a swap.

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3628094
Share on other sites
KISIN Veteran

KISIN

Posted
Posted
Ah the 3-bolt type (not T3 part like i listed above) same specs but on a 2.4 i would hazard full boost threshold would be around 4600-4700rpm in twin form. On a 26 in twin form and ext gate they are on fully by around 4300-4500 depending on engine specs.

sorry i just had an exam, and im a bit lost/tired/slow.

Are you saying that on an RB26 2 x TD05-18G make full boost roughly around 4400rpm ?

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3628158
Share on other sites
funkymonkey Grand Master

funkymonkey

Posted
  • Author
Posted
NOPE. Mine is only the 20G. If you have the 25G i would be interested in a swap.

dunno bout a swap, but its for sale. too big and laggy for my needs. I want power on tap. Comes with lowmount manifold (the turbo's got an adapter plate welded on), HKS external wastegate and pipe to suit.

post-256-1202157014.jpg

post-256-1202157025.jpg

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3628250
Share on other sites
STATUS Grand Master

STATUS

Posted
Posted
dunno bout a swap, but its for sale. too big and laggy for my needs. I want power on tap. Comes with lowmount manifold (the turbo's got an adapter plate welded on), HKS external wastegate and pipe to suit.

what is the rear housing size? inside the exh scroll near the flange is a number and this is the area (cm2) and can you pm what you want for it as a setup?

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3628721
Share on other sites
RS500 Experienced

RS500

Posted
Posted
Does anyone have any specs for the Garrett TD05H 16G with a 8.0cm2 housing? How's it compare specs wise to an HKS GT2530? For an RB20DET if that helps.

here you go.

http://www.trust-power.com/overseas/products.html

just scroll down to the turbo charger section, click on "Turbo Charger Data" and all will be revealed.

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3629522
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...