Jump to content
SAU Community

Recommended Posts

leave me alone ya big bullies

HTFU princess :) Shouldn't have sold it then eh? :D

Spotted a black 32 in the city, sounding real sick ... not idling right at all :blink:

Saw RBT 034, black r34 with exhaust, possibly GTR spoiler and maybe wheels on Greenhill road about Midday today.

Also saw bayside blue r34 GTR with white CE28's on sat night coming down Greenhill road following a MX5, it looked like the lead car from the NS cruise a month or so ago.

Hope you didn't try to mess with it Dan, has over 450kw at it's disposal...

Spotted a nice silver 33GTS-t going down Main North Rd this arvo, tried to catch up but couldn't due to the traffic. Could have sworn it had an SAU sticker on it

Hope you didn't try to mess with it Dan, has over 450kw at it's disposal...

Spotted a nice silver 33GTS-t going down Main North Rd this arvo, tried to catch up but couldn't due to the traffic. Could have sworn it had an SAU sticker on it

I was in a government plated Falcon :verymad:

Yeah I've seen it at a few car shows... crazy stuff.

Spotted: Aberax in his 33 on Gawler St Pt Noarlunga about 10ish near the murray road bend. Tooted but dont think ya heard me

Really!?!? Yeah, around 9:30-10 i was around that area...i think i remember now, i think you where going in the opposite direction and i noticed the HID

I was so out of it, had been to a mates 21st bday LAN, so had been drinking a bit ( i wasn't drink driving, was recovering), been awake a lot, and was wanting to get home to sleep.

spotted:

silver R33 with plate BULLET1 (or similar) GTST dressed up with GTR badge and rear wing going north on Tapleys Hill road (over long weekend)

black R34 4-door with 2-people in it going west on Sir Donald Bradman drive near airport during week before long weekend

black R33 GTR at Bunnings Mile End one evening during week before long weekend approx 7pm was there when I went in but had left when I came out

silver R33 GTST S2 (belonging to SAU:Giveitall) at Bunnings Marion tonight at 8pm {was meeting him to buy R33 dash cluster}

did Adelaide to Whyalla return on Sunday with a mate (in a semi) and didn't see any Skyline's at all

LOL Carl you did something stupid so they smiled and gave you the nod? btw whats ROR mean? Oh yeah my sig + avatar are on Glandstone, still haven't seen your rolla in action yet.

Spotted a clean as R34 4 door again today, he where I saw it so its always there, makes me want one haha.

Also spotted a boro/drift spec/budget spec/ghetto/trashed yellow S13 with black roof. Kinda looked weird :D

Oh and our RE Seminar Day teacher telling us not to do 'wheelies' in our cars as we leave :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...