Jump to content
SAU Community

Recommended Posts

spotted a white 4 door 34 that is suffering a poor poor life, had a very very very ugly front bar, very r33 veilside styled, but much worse. standard sideskirts and rear bar. had chrome starcorps. RIP little fella.

spotted a white 4 door 34 that is suffering a poor poor life, had a very very very ugly front bar, very r33 veilside styled, but much worse. standard sideskirts and rear bar. had chrome starcorps. RIP little fella.

sounds like a commy driver trying to convert to skylines

just cant let go off the chromies and shit yo

on the subject of commodore drivers, I spotted a f**kwit p-plater in a red vr nearly take my front end of this afternoon when the toss changed lanes in front of me without allowing enough room. When I beeped the horn at him and got a filthy look in his mirror it was apparent that even though I had to hit the brakes I was still in the wrong.....

spotted a white 4 door 34 that is suffering a poor poor life, had a very very very ugly front bar, very r33 veilside styled, but much worse. standard sideskirts and rear bar. had chrome starcorps. RIP little fella.

I think I know the car your talking about, I parked next to it in the city, it has a number plate made up of a random series of numbers and letters?(I couldn't decipher it). The bar sticks out a long way forward, it has an ET exhaust and I think its auto. RIP

on the subject of commodore drivers, I spotted a f**kwit p-plater in a red vr nearly take my front end of this afternoon when the toss changed lanes in front of me without allowing enough room. When I beeped the horn at him and got a filthy look in his mirror it was apparent that even though I had to hit the brakes I was still in the wrong.....

Got that attitude from a 4WD bitch last night. Using the size of her vehicle to manipulate people. Not me.

Liana vs Landcruiser :sweat:

spotted [RRS-400] on main northroad near parafield airport, grey 34 4 door on new 'S' plates near en field maccas, black 33 also on new 'S' plates turning off regency onto main north, and a silver 33 on the top level of wislons parking on hindley. all between 8 and 9:30 am.

spotted the same silver r33 on port rd that i always see in the morning......

spotted the purple r33 gtr "RH1" in the same spot on port rd

and a white r33 on salisbury hwy this arvo aswell

yesterday heard, then saw a silver stag boosting it up a hill near my place. saw some sort of silver rims, lowered and exhuast near port noarlunga.

then on the way to work, saw another silver stag with black rims, floor it around traffic onto lonsdale road.

today saw 3 stags, 2 silver and 1 wine red all looked pretty stock. one of the silver ones was a s2 the other 2 where s1's

saw them on brighton road around 4ish

only saw 2 33's and no 32's. are all the skylines defected or what?

white 33 with white wheels (with dish) on daws road today about 1pm,

went thru my worksite (the etsa truck parked off to the side) at respectable speed (thanks :sweat: )

looked a bit like aberax's 33, but couldnt tell from up there LOL

white 33 with white wheels (with dish) on daws road today about 1pm,

went thru my worksite (the etsa truck parked off to the side) at respectable speed (thanks :blink: )

looked a bit like aberax's 33, but couldnt tell from up there LOL

:sweat: Could have been me, pulled out of a side street after going to jaycar and there was possibly a etsa truck on the side of the road, I'm not safe anymore :) .

I did the speed limit, i just got there quicker then other cars. :)

:sweat: Could have been me, pulled out of a side street after going to jaycar and there was possibly a etsa truck on the side of the road, I'm not safe anymore :) .

I did the speed limit, i just got there quicker then other cars. :)

haha so it was you :blink:

:w00t: all good on ya speed, better than half the twats that just flew by

Just out on my balcony spotted a gun meteal grey R33 then about 5 min later a bunch of bikes. Also a commy driver trying to do a burnout on Grenfell st cops pull him up a few minutes later he didnt see them a few cars back. :P

Edited by moose_r33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...