Jump to content
SAU Community

Recommended Posts

spotted a white 4 door 34 that is suffering a poor poor life, had a very very very ugly front bar, very r33 veilside styled, but much worse. standard sideskirts and rear bar. had chrome starcorps. RIP little fella.

spotted a white 4 door 34 that is suffering a poor poor life, had a very very very ugly front bar, very r33 veilside styled, but much worse. standard sideskirts and rear bar. had chrome starcorps. RIP little fella.

sounds like a commy driver trying to convert to skylines

just cant let go off the chromies and shit yo

on the subject of commodore drivers, I spotted a f**kwit p-plater in a red vr nearly take my front end of this afternoon when the toss changed lanes in front of me without allowing enough room. When I beeped the horn at him and got a filthy look in his mirror it was apparent that even though I had to hit the brakes I was still in the wrong.....

spotted a white 4 door 34 that is suffering a poor poor life, had a very very very ugly front bar, very r33 veilside styled, but much worse. standard sideskirts and rear bar. had chrome starcorps. RIP little fella.

I think I know the car your talking about, I parked next to it in the city, it has a number plate made up of a random series of numbers and letters?(I couldn't decipher it). The bar sticks out a long way forward, it has an ET exhaust and I think its auto. RIP

on the subject of commodore drivers, I spotted a f**kwit p-plater in a red vr nearly take my front end of this afternoon when the toss changed lanes in front of me without allowing enough room. When I beeped the horn at him and got a filthy look in his mirror it was apparent that even though I had to hit the brakes I was still in the wrong.....

Got that attitude from a 4WD bitch last night. Using the size of her vehicle to manipulate people. Not me.

Liana vs Landcruiser :sweat:

spotted [RRS-400] on main northroad near parafield airport, grey 34 4 door on new 'S' plates near en field maccas, black 33 also on new 'S' plates turning off regency onto main north, and a silver 33 on the top level of wislons parking on hindley. all between 8 and 9:30 am.

spotted the same silver r33 on port rd that i always see in the morning......

spotted the purple r33 gtr "RH1" in the same spot on port rd

and a white r33 on salisbury hwy this arvo aswell

yesterday heard, then saw a silver stag boosting it up a hill near my place. saw some sort of silver rims, lowered and exhuast near port noarlunga.

then on the way to work, saw another silver stag with black rims, floor it around traffic onto lonsdale road.

today saw 3 stags, 2 silver and 1 wine red all looked pretty stock. one of the silver ones was a s2 the other 2 where s1's

saw them on brighton road around 4ish

only saw 2 33's and no 32's. are all the skylines defected or what?

white 33 with white wheels (with dish) on daws road today about 1pm,

went thru my worksite (the etsa truck parked off to the side) at respectable speed (thanks :sweat: )

looked a bit like aberax's 33, but couldnt tell from up there LOL

white 33 with white wheels (with dish) on daws road today about 1pm,

went thru my worksite (the etsa truck parked off to the side) at respectable speed (thanks :blink: )

looked a bit like aberax's 33, but couldnt tell from up there LOL

:sweat: Could have been me, pulled out of a side street after going to jaycar and there was possibly a etsa truck on the side of the road, I'm not safe anymore :) .

I did the speed limit, i just got there quicker then other cars. :)

:sweat: Could have been me, pulled out of a side street after going to jaycar and there was possibly a etsa truck on the side of the road, I'm not safe anymore :) .

I did the speed limit, i just got there quicker then other cars. :)

haha so it was you :blink:

:w00t: all good on ya speed, better than half the twats that just flew by

Just out on my balcony spotted a gun meteal grey R33 then about 5 min later a bunch of bikes. Also a commy driver trying to do a burnout on Grenfell st cops pull him up a few minutes later he didnt see them a few cars back. :P

Edited by moose_r33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...