Jump to content
SAU Community

Recommended Posts

white r33 with BBS style meshies on south rd turning towards ghettoland

black r34 4dr, got a wave, a block further down on beach rd

silverish r33 at coles hackam

black r32 with old school scripted skyline badge on it and turbine engine wheels . in the normal sun drenched spot.4 car garage and you let it rot outside.. shame on you.

yeah buddy....& now a dent in the right rear corner as well thanks to the missus, lol

:( you know you're meant to claim that as an "off roading" dent pete, not something the missus did

spotted mud hunter on the dukes highway about 11am this side of keith i was in the etsa vito van.

*waves* i do remember the vito. man there were so many dicks driving on the dukes and the riddoch today. especially down the overtaking lanes

spotted a 32 gtr on blacks road, at the oakridge road roundabout, was grey, and had gold meshies, possibly bbs. at around 1.45pm.

black or grey 32 gtst with a kit, on byards road roundabout, happy valley at about 5pm.

Spotted a stagea in westlakes car park, had sausa stickers on back window, also later this arvo a white s2 r33 in same car park, and also a black 33 as I was leavin car park

spotted a 32 gtr on blacks road, at the oakridge road roundabout, was grey, and had gold meshies, possibly bbs. at around 1.45pm.

That probably was me as I was on my way home from Mt Gambier.

PS - there is no such thing as traffic on country roads when you have a GTR :D

That probably was me as I was on my way home from Mt Gambier.

PS - there is no such thing as traffic on country roads when you have a GTR :D

when did u come back from down that way mate? i headed out first up this morning, didnt see any imports at all LOL

when did u come back from down that way mate? i headed out first up this morning, didnt see any imports at all LOL

I left Mt Gambier about 10am. Took the Pathaway / Keith route then got off the Freeway at the Crafers exit to take Upper Sturt Rd.

Edit - I must have left earlier... 4 hours is not long enough for the trip home...

I left Mt Gambier about 10am. Took the Pathaway / Keith route then got off the Freeway at the Crafers exit to take Upper Sturt Rd.

Edit - I must have left earlier... 4 hours is not long enough for the trip home...

lol i left way before u then. was about 8 when i filled up at caltex, went the same way (penola, naracoorte, padthaway, keith). stopped at coonalpyn bakery. fail at sauce-ing a sausage roll (dont poke it in, put it on top of the sausage roll WTF) and fail at choc donut (something that resembled a donut with what looked like ice magic on top LOL)

just spotted an orange 33 going past and then parking a bit further down the street, possibly an sau sticker on the rear quarter window...

spotted morris (twins33) this arvo at his place inspecting some panels to get fixed on my car

also spotted a black 33 on happy valley drive at about 3.15pm, female driver, got no wave back

spotted a light metallic green stag at BP glenelg

that mad looking Silver R35 with pilates stickers on it near the airport, 200k worth of goodies added to it hey,,,, bit over the top

white r33 near kmart reynella, white wheels

silver r33, same area

Spotted all the usual SAU suspects out at the cruise today :)

Blue32.. Norm.. Luke (although minus his car).. few stags wearing sau stickers. Nice seeing you all.

Might sound weird but did I speak to you? :D

So really, if both cars can be driven away fine, then the accident doesn't need to be reported? I was told that any accident was required to be reported (even if it's minor)? But where do you draw the line to class something as minor (just a small bump)?

As I'm claiming it on insurance, I needed a police report.

And yeah, the cop was a rookie... no stripes on his shoulder badge things.

hey mate, i had an accident a while ago, and we both could drive off, a couple hours later i went to report it. the cop said that if the damage is under 1 grand it dont need to be reported.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...