Jump to content
SAU Community

Recommended Posts

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

very nice results mate looks like it would be very quick on the street, looking at a similar package as yours, got the microtech and everything else, just dunno which turbo as yet but i'm after sumthing fun to drive on the street and the gt-rs certainly looks fun,

does anyone know of a decent tuner of microtech in brisbane, because everyone i talk to regards them as being a bit rough, but obviously it comes down to the tuner, just trying to find one who specialises in them at the moment.

Nice result! cant wait to get mine tuned :D, only 25days away lol

What fuel? and are you still using the stock dump and front pipes or after market?

Just on BP 98 Octane, wish we had some of that 100 Shell fuel up here :/

Yeah aftermarket all in one bellmouth 3" dump pipe.

You'll love it man, IMO its probably one of the best sized turbos you can go on a RB25 with getting good power out of it and being very responsive at the same time. Very good street driving.

Here's mine...

GTRSPSI.jpg

dangerman, you're an idiot :ermm:

for starters you can't even see how much power its making at 60km/h, and even if you could I doubt the postie bike makes anywhere near that.

Thats also where the graph starts, which means thats where the tuner accelerated...before that he was cruising in 4th gear. Well done, moron :D

is that cos its microtech or cos its map sensor thats its poo ?

map sensor is fine

it doesnt have idle up when cold, so it makes it hard to tune when its dead cold, but with abit of time you can get it so its perfect.

map sensor is fine

it doesnt have idle up when cold, so it makes it hard to tune when its dead cold, but with abit of time you can get it so its perfect.

how long did it take him to tune start to finish? Also what did your tuner do about knock? or did he just stay conservative enough not to have to worry about it?

how long did it take him to tune start to finish? Also what did your tuner do about knock? or did he just stay conservative enough not to have to worry about it?

He listened for knock electronically (not sure the exact name of the machine they use, im sure someone here knows though), and there was no knock. The tune was done safe to accomodate for hot days up here.

Well he had it for 2 days just so he could get it right and i told him he could have it for as long as he wanted, he also road tuned it to get it driving perfect and spent a few hours on idle alone to get it perfect. He went out of his way to make me happy with it and he succeded greatly. Only person i will use in Townsville now for any work that i can't do myself.

F@#* dangerman that just shit comment but that's my opinion.

any way i found my last dyno with my torque level, id like to see a post bike like this,even some larger turbos don't make torque like this...

post-26570-1203499809_thumb.jpg

Edited by WARLORD
Just on BP 98 Octane, wish we had some of that 100 Shell fuel up here :)

Yeah aftermarket all in one bellmouth 3" dump pipe.

You'll love it man, IMO its probably one of the best sized turbos you can go on a RB25 with getting good power out of it and being very responsive at the same time. Very good street driving.

Hehe i dont have a gt-rs, that was my orignal choice and i was dead set on it after reading what everyone thought about them, but after doing hours of research it seemed the hks 3037 pro s was the better overall option, so thats what i went for :D , my aim is 270-280rwkw with a nice safe tune, only downside is im going to be running 95octane (all we have in my town which sucks) so i might need a little bit over 1bar to make that power, should be perfect for the street/track in my opinion.

Anyway awsome result man!:D

I really dont know how much to read into torque

This was my readout with standard everything really

it is an auto and in second gear i think that make abit of a difference with gear ratios etc ( not sure the exact ratio of 2nd compared to a manual in 3rd gear)

post-18618-1203587000_thumb.jpg

Hmm something dodge with that torque readout. Maybe some others more knowledge than I can explain how it could read that. Maybe the one above is also subject to discrepancy via how its measured... but stock doing 800Nm is a 'off' looking lol Also... you're power looks insanely high for a stock GTT/GTST type engine. Aren't dyno runs usually done in 4th or 3rd? Don't recall seeing one in 2nd before.

Maybe this is why my mechanic said he doesn't usually bother measuring torque cos it depends on the dyno setup too heavily? or how its used... or something

Edited by sl33py

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bah! I can't see the point in custom number plates at all. I went to the rego office, fished through a box of "premium" plates (the ones that had the "not as tall" option for the front plate) and picked the one that had a 32 in it. That's the limit of the effort and cost I will put into number plates. The only plate that I'd consider paying for would be 2332, but that's not possible here because it already exists from probably 90 years ago, and it would cost a fortune to obtain it, if it were available.
    • After chasing my tail with LS results..... and cheaper than a turbo swap... How confident are you that the dyno is accurate relative to other results? How fast is the car - What MPH does it actually run? Is this similar to what people running this power would expect?
    • Hi mate I am having an identical issue with my 98 R34 GTT. The engie suddenly cuts out under load at about 3-4k, black smoke out exhaust. Almost feels like traction control kicking in. No CEL but still going to check codes later today. Car was sitting in the shed for about 5 months before hand and only idled a few times, took her out with about 1/4 tank, filled up and thats when the issues started happening.  Threw on a spare set of coils/harness and checked plugs which was no help. Recently had fuel pump/filter changed so surely thats not the issue unless condensation in fuel, I just havent had the time to drain it It's running a hi flow turbo, bosch 1000cc injectors, walbro 450L, Z32, Nistune etc... All about 2000km old.
    • I always wonder where the obsession with legal/illegal spacing on number plates in the UK comes from. Because it comes up in comments in every UK-based video I see on youtube. From my point of view all of your plates look a bit odd. Just because there are no markings whatsoever. In Australia we have the state that has to be on it. In Europe you get stamps and state logos. Yours look a bit like a throwaway draft that people then stuck with. And attached with blu tack so that it falls off at the slightest disturbance. Not trying to hate, but it's interesting how things are done in different countries. Do you have to follow a lettering convention when choosing a custom plate?
    • Hybrid sounds like a supercharger... It's half a turbo, with a belt to drive it! Oh wait, they're just called super chargers...
×
×
  • Create New...