Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  Adz2332 said:
so if i look from under the bonnet down between them i should see something?

its a very tight gap

but you can make it out if you look at the right angle

its on a plate, in between the turbos two housings. aka the core

  djr81 said:
Try a search. The tooth section of the cam gear wears very quickly because it is soft aluminium.

Also whilst you are arsing about with the gears change the belt & think about changing the water pump.

I think you have your wires slightly crossed, the older style of HKS cam gears were indeed prone to tooth wear, but the newer design (current model) are made from the same Duralumin alloy that the Tomei Cam Gears are made from.

  Adz2332 said:
Ok now i know ull say search but alot of things goes over my head.

Im about to spend a bit of cash on my GTR and im just after a little advice on wheather im doing the right thing or not and getting the best bang for my buck.

I have a GTR R33

Mods

Trust intercooler

3 1/2 Kakimoto 06&R cat back system

Just Jap front pipe

N1 Steel Turbos (believed)

Blitz PODS

Oil Catch Can

Now im thinking (Ive read and have thought these sounded the best for price) of getting these

Power FC and Controller $ 796

Greddy PRofec B Spec II $ 336

HKS Cam Gears $ 324

Total $1456

Plus tune of course.

Would that all go well together??? Any thing you would change etc....

Advice would be great!

-Install a Supercharger for low RPM then the turbos kick in at the mid high RPM

OR

-Install a NOS Kit

:banana::):(

Just get the boost controller and Power FC controller and/or upgrade the flywheel.

  Blitz said:
I think you have your wires slightly crossed, the older style of HKS cam gears were indeed prone to tooth wear, but the newer design (current model) are made from the same Duralumin alloy that the Tomei Cam Gears are made from.

Yeah sorry old info I guess. I saw some over the weekend advertised as duralium.

So I guess they have fixed it.

Million dollar quesrion: How do you pick the difference between the two?

  djr81 said:
Yeah sorry old info I guess. I saw some over the weekend advertised as duralium.

So I guess they have fixed it.

Million dollar quesrion: How do you pick the difference between the two?

Different colour/design.

  Adz2332 said:
Bought some Tomei cam gears

You need to focus on fuel before you throw money away on things like cam gears. If you really do have N1 turbos and you buy a PowerFC you're going to have your injectors maxed out before you will make much power.

Fuel is the pre-requisite to making power and should be your objective before things like cam gears. Injectors and a fuel pump.

I use SARD injectors and Nismo fuel pumps and recommend them.

Correct about the stock inj...they will be fine for the power you are looking at making. Might be worth getting them flow tested though.

Go the PFC...cam gears....boost control....K&N filter and you should see 250kw at the wheels at around 14-15psi. Just make sure you do indeed have steel wheeled turbos :D

Thanks mate...

Does anyone know are cam gears a defect in SA?

Just got the tomei ones and they look to nice to be hidden, so was thinking a clear cam cover but if there a defect ill keep them hidden... lol

  Adz2332 said:
Ok now i know ull say search but alot of things goes over my head.

Im about to spend a bit of cash on my GTR and im just after a little advice on wheather im doing the right thing or not and getting the best bang for my buck.

I have a GTR R33

Mods

Trust intercooler

3 1/2 Kakimoto 06&R cat back system

Just Jap front pipe

N1 Steel Turbos (believed)

Blitz PODS

Oil Catch Can

Now im thinking (Ive read and have thought these sounded the best for price) of getting these

Power FC and Controller $ 796

Greddy PRofec B Spec II $ 336

HKS Cam Gears $ 324

Total $1456

Plus tune of course.

Would that all go well together??? Any thing you would change etc....

Advice would be great!

Where do ou get the profec b for 336?

Also you should upgrade your fuel reg. To an adjustable nismo fuel reg one that replaces the oem one so u dont have to max out your injector cylce and u can bump the fuel rail pressure up so it is all safe. There only $200 buks too from memory mate. :wave:

also from memory it possible to make 300kw or close to on n1's with power fc, full exhaust dumps to rear, boost controller, fuel reg, maybe new fuel pump just be safe, small cams + cam gears and bigger front mount BUT most of all it depends on tune and conditon of engine and n1's mate :wave:

Also you should upgrade your fuel reg. To an adjustable nismo fuel reg one that replaces the oem one so u dont have to max out your injector cylce and u can bump the fuel rail pressure up so it is all safe. There only $200 buks too from memory mate.

Thanks ill have a look around for one..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...