Jump to content
SAU Community

Recommended Posts

Its time for v8 drivers to get with the times and strap some technology onto the v8s..

then they will feel the wrath...

all alloy, cross bolted and ribbed construction.

4 cams.

4 valves per cylinder.

6 bolt main caps.

FORGED steel crank and factory blueprinted internals.

techy enough for you? :P

damn toyota V8's.

turbo + v8 = best compromise between the 2 options. I'd love to see what a turbocharged lexus v8 would be like in a skyline chassis.

personally id go for a hybrid nissan V8.

VH architecture, 4.1 litre block, and 4.5 litre pistons, rods, crankshaft and custom camshafts.

why the 4.1 litre block you ask? superior design. why the 4.5 litre internals you ask? they fit right in. so why the hell not?

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

I really badly want to put a VK56 5.6L quad cam V8 from a Nissan Titan truck in my 33...

I'll quote myself in case you missed it... 4.5L? nah go the 5.6 ^^^^

screw the Toyota v8... these things are making 400hp+ with just some cams... and the torque... oh the torque... and the sound of a tuned quad cam V8... oh god

  • 1 year later...

haha v8 lovers,i drive r32 GTR pretty much stock juz a pod filter. i drag a couple of v8s on the streets, but havnt really clock it over a 100km. i havnt lost to any v8s before, but if i take it to the legel drags then it will be a different story!.

i beat the street v8 by around 4 to 5 car length! believe or not.

v8s lovers on streets are shit. Most of the v8 was design for road use like u see on the street, and im not talking about v8 supercars.

The GTR was made for pure racing as you can see, obvously they are powerfull.

[/quote

BAHHAAH that made no f**ken sense

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...