Jump to content
SAU Community

Recommended Posts

I drive past Plympton alot. Hope that wasn't me....what kind of rims and headlights??

I haven't seen any black Coupes like mine down my end of town.

Driving into the city I see V's a fair amount but it is the first V I have seen in my area of Plympton.

It had a black grill with an infinity badge, black rims and aftermarket headlights.

The only badge on the back was Skyline, looked like it had been modified a bit to look like a sleeper.

If it was you, please :action-smiley-069: to me next time, feeling a little lonely in my V. (don't look at how dirty it is at the moment though!)

Driving into the city I see V's a fair amount but it is the first V I have seen in my area of Plympton.

It had a black grill with an infinity badge, black rims and aftermarket headlights.

The only badge on the back was Skyline, looked like it had been modified a bit to look like a sleeper.

If it was you, please :action-smiley-069: to me next time, feeling a little lonely in my V. (don't look at how dirty it is at the moment though!)

I have a black grill, infinity badge and aftermarket headlights. Also only have the skyline on the back. But i dont have black rims, dark not black. Also i have a quad exhaust if you saw the back?

I have a black grill, infinity badge and aftermarket headlights. Also only have the skyline on the back. But i dont have black rims, dark not black. Also i have a quad exhaust if you saw the back?

I may have mistakenly thought that the rims were black, they were definitely dark rims. Very nice ride :)

http://img835.images...20512114021.jpg

Thats it there...havent taken any recent piccies of it

Not real dark rims, May not have been me, but haven't seen any others like mine with my mods

Also it has SA plates now, so ignore the VIC ones

Edited by runner4life
http://img835.images...20512114021.jpg Thats it there...havent taken any recent piccies of it Not real dark rims, May not have been me, but haven't seen any others like mine with my mods Also it has SA plates now, so ignore the VIC ones

The rims were like a dark powdercoat and the front was the same.

I was in my silver V35 four door, car is completely original including the rims but has a double barrel exhaust. SA number plate ending in ACD.

It was in morning peak hour traffic so I will forgive this time if it was you :yes: but next time I want a :wave:

So basically i'm keeping it on the low-down and keeping out of trouble and trying not to draw attention to myself incase i do meet an educated police officer who knows that the car is illegal for me.

Sorry, that was my point.. it isn't illegal/restricted for you in Qld.. it is under 210kw, isn't a V8 or turbo charged.. so you don't need to worry..

Sorry, that was my point.. it isn't illegal/restricted for you in Qld.. it is under 210kw, isn't a V8 or turbo charged.. so you don't need to worry..

Even if it's over the power to weight ratio legal limit? :whistling:

Power to weight only applies when applying for an exemption. I thought that vehicles had to be below 206kw?

^^ what he said.. (except it is under 210kw in Qld).

That is why I previously said that if Qld Transport ever decide to ban the 350GT, you don't have any hope of getting an exception..

I was in my silver V35 four door, car is completely original including the rims but has a double barrel exhaust. SA number plate ending in ACD.

It was in morning peak hour traffic so I will forgive this time if it was you :yes: but next time I want a :wave:

i pass thru plympton most days. 90% of the time i dont see any either, then occasionally i see more than a few in a couple hours.

oh and define "double barrel exhaust"

i pass thru plympton most days. 90% of the time i dont see any either, then occasionally i see more than a few in a couple hours. oh and define "double barrel exhaust"

Attached pic of my car's back end to see what I mean by 'double barrel'post-89406-0-69044400-1346225380_thumb.jpg

Edited by newv35owner

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...