Jump to content
SAU Community

Recommended Posts

was over at Red R Racing yesterday checking out the new engine room. Paul was showing me box after box of new parts for your build.

the deal Paul has worked out for you is a cracker. We got stuck into pulling the 25 out last night and getting it ready to be sent to its new home.

hey dave - paul has spoken about u and your setup in the past...do u have a thread on your car? im interested to know what turbo setup u are running to achieve 604awhp.

its funny if u look at the gtr.co.uk website a lot of the gtr owners have taken up the rb26/30 upgrade as well as the rb30 god in nz (rips racing)...looks like the 3ltr bottom is finally starting to make recognition here in aust :thumbsup:

oh dear paul - no more can u lay sh1t on forklift motors HA!

hey dave - paul has spoken about u and your setup in the past...do u have a thread on your car? im interested to know what turbo setup u are running to achieve 604awhp.

its funny if u look at the gtr.co.uk website a lot of the gtr owners have taken up the rb26/30 upgrade as well as the rb30 god in nz (rips racing)...looks like the 3ltr bottom is finally starting to make recognition here in aust :D

oh dear paul - no more can u lay sh1t on forklift motors HA!

HKS T04Z Marko. The figure was made at autosalon and was tuned by Paul the night before. It was good enough to win us a dyno trophy :thumbsup:

Specs of Engine build

Mahle Pistons

Greddy oil pump

eagle rods

R33 Crank Grubbed screwed

Tomei buckets & springs

Nitto Vavles

Tomei Cams 280 by 10.5mm Lift

Ported head

N1 Block

Trust Manifold

Hypertune plenum

700cc injectors

Paul always had the 30 idea floating around and one day wanted to build one but in a RWD car as the 4WD RB30 still was not a proven combo in aust. Now that his friend in Sydney has sucessfully has got a 4WD one sorted and has spent a bit of time with his mate Justin in Brisbane who eats and sleeps 30's (single cam) he was keen to build one that would be 'off the hook'. NYTSKY's new bottom end was going to be a methanol drag engine wearing 'twoogles' current head put into an s13 silvia but when the sale of the gtr shell fell through the plans were shelved. I would have liked to have seen the s13 car completed but having it going in Dave's car will at least have it around to see running instead of selling off all the bits.

Forklift jokes were to wind up you guys on here, im sure you know how much he likes a bit of a giggle. lol.

Edited by blitzxtr

Keep the VCT with the cams i have now or go 264 IN 272 EX and no VCT?

Decisions, decisions.......

I have seen back to back runs on a big 25/30 with the VCT on and off, the difference on low end torque was very noticeable.

Just out of curiosity what do you use this car mainly for, just as a weekend warrior? Or does it see lots of track action?

No doubt I would lose my license very quickly with that sort of power on the street, ~200kw is enough in this cold weather atm for me!

Read all 56 pages over the last 2 days, was a top read! One thing I would add is you should consider plumbing your catch can back into the intake, that way you will get vacuum assist to help scavenging all the blow by gases etc, might result in a little oil in the intake but generally nothing wrong with that.

Also how much difference was there with the VCT power wise down low? Curious as mine is currently not connected (using rb20 ecu) but I am considering building a controller for it.

Edited by Rolls
Just out of curiosity what do you use this car mainly for, just as a weekend warrior? Or does it see lots of track action?

No doubt I would lose my license very quickly with that sort of power on the street, ~200kw is enough in this cold weather atm for me!

Read all 56 pages over the last 2 days, was a top read! One thing I would add is you should consider plumbing your catch can back into the intake, that way you will get vacuum assist to help scavenging all the blow by gases etc, might result in a little oil in the intake but generally nothing wrong with that.

Also how much difference was there with the VCT power wise down low? Curious as mine is currently not connected (using rb20 ecu) but I am considering building a controller for it.

plumbing it into the intake is fine on the street but not on the track. I originally had mine set-up that way and saw no blow-by on the street but at Superlap the car blew oil out the breathers, filled the small tank and then spewed oil into the turbo. Coming off throttle into turn one the oil sprayed out the inlet tract shorting out the AFM's, cutting the car out mid corner and almost ended up on its roof!

Oil mist is also detonation fuel.

Edited by blitzxtr
Just curious how bad the tolerances must be on my motor for them to rattle for a solid minute when cold.

i think it also depends on the pistons u are running, if they're teflon coated etc

i running mahle's & yes they make a bit of noise but it wouldnt be longer than 20sec maybe?

i think it also depends on the pistons u are running, if they're teflon coated etc

i running mahle's & yes they make a bit of noise but it wouldnt be longer than 20sec maybe?

I'm running arias pistons, but its quite a loud racket for about a minute, if the cold start pulls the ignition timing (only seems to do it 1/3 starts for some reason) they don't rattle though, generally the lower the revs the worse it is, might have to look into getting the tune amended.

Anyway I'll stop taking this thread off topic.

So NYTSKY you reckon the 30 will chirp second? :D

Edited by Rolls

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...